Table of Contents
Advertisement
No Options
7
Timeout
Sets the timeout values. The default is
settings
as follows:
Discoverable: 0 minutes
Search: 10 seconds
Paring timer: 5 minutes
Depending on the conditions, some options may
be greyed out and not be available
To register a Bluetooth device
If the external device is not yet registered on the
Bluetooth screen, register it by the following
procedures:
• Searching the device from N600i
1. Press Options to execute Search
Available devices are found and displayed.
2. Select the target device from the searched list
3. Enter a passkey on N600i.
Enter the same passkey to the target device.
4. Relevant device is registered after authentication is
complete
• Operating N600i from the target device
1. Execute Pairing standby to put N600i in standby
mode.
2. A passkey screen appears when receiving
registration request from the target device
3. Enter a passkey.
4. Each device is registered after authentication is
complete
Passkey is the Bluetooth PIN code for the remote device.
A passkey is a number from 1 to 16 digits.
Before Bluetooth can communicate with a PC,
ensure the Bluetooth Driver is installed.
There may be Bluetooth devices that cannot be
connected to your N600i
Depending on the connection status, a Bluetooth
device may not function correctly. In such a case,
retry operation from the device side, or switch
your N600i off and on.
Synchronisation
It is possible to synchronise your Calendar,
Contacts and To Do lists locally between your
N600i and a PC using Bluetooth.
Contacts are treated as vCard files and Calendar
and To Do list entries as vCalendar files.
N600i enables operation with the NEC Mobile Suite
(NMS) which is an interface to interact with the
Phone.
The NEC Mobile Suite contains four modules that
deal with specific type of data, the Backup/Restore,
the MRM - Multimedia Resource Manager, the
PIM - Personal Information Manager and the PIM
Synchronisation. For details, refer to the NEC
Mobile Suite N600i User Guide provided with your
N600i.
To use Synchronisation
☛
7 or select 7 (External connection) to press
the Enter key on the Menu screen, and press 2 (select
Synchronisation).
Synchronisation provides the following options.
No Options
1
Synchro-
Starts the synchronisation of updated
nise
data with the selected server.
2
Server set-
Displays the synchronisation server
tings
settings for the selected server.
3
Synchro-
Starts the synchronisation of all data
nise all
with the selected server.
4
Copy
Copies the settings of the selected
settings
server.
5
Delete
Deletes
information. When Server one to
Server six is selected, this operation
returns the settings to default values.
40
the
selected
server
Advertisement
Table of Contents
