VERDER VERDERFLEX Dura 80 Operating Manual page 6

Declaration of Conformity (UK)
In accordance with the UK Supply of Machinery (Safety) Regulations 2008, No 1597 ANNEX II, Part I,
Section B
We,
VERDER Ltd., Unit 3 California Drive, Castleford
hereby declare that the following machine adheres to the relevant UK legislation detailed below:
Designation
Dura 80
UK Legislation:
• Supply of Machinery (Safety) Regulations 2008
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012
• Electrical Equipment (Safety) Regulations 2016
The following designated standard(s) has been applied:
• BS EN ISO 12100:2010 - Safety of machinery - General principles for design - Risk assessment and risk
reduction
The pump, to which this declaration refers, may only be put into operation after it has been installed in the way
prescribed by the manufacturer and, as the case may be, after the complete system of which this pump forms
part, has been made to fulfil the requirements of The Supply of Machinery (Safety) Regulations 2008.
Manufacturer
Date: 24/ 11/ 2022
Original instructions (en)
VERDER Ltd.
Unit 3 California Drive
Castleford
WF10 5QH
UK
Company Stamp / Signature:
Anthony Beckwith
Head of Engineering
Version 00
© Verder Liquids B.V
Dura 80 - Operating manual
6 | Page