Advertisement
From the 9615 harness to the aftermarket radio, connect the:
• Black wire to the ground wire.
• Yellow wire to the battery wire
• Red wire to the accessory wire.
Note: There will also be a Red wire on the SWC harness to connect as well.
• Blue wire to the power antenna wire.
• Blue/White wire to the amp turn on wire.
• Orange wire to the illumination wire. †
• Brown wire to the mute wire. †
• Blue/Pink wire to the speed sense wire.
• Green/Purple wire to the reverse wire. †
• Light Green wire to the parking brake wire. †
• Yellow RCA jack to the Yellow RCA jack from the SWC Harness labeled "To Reverse Camera". ‡
• Red & White RCA jacks labeled "FRONT LEFT" and "FRONT RIGHT" to the full range front
amplifier output jacks.
• Red & White RCA jacks labeled "AUX Left" and "AUX Right" to the audio AUX-IN jacks. †
• Disregard the following (8) wires:
Gray, Gray/Black, Green, Green/Black, Purple, Purple/Black, White, White/Black
† If applicable
‡ Mandatory connection to retain parking sensor graphics
CONNECTIONS
From the SWC harness to the aftermarket radio:
• Parrot: Connect the AX-SWC-PARROT (sold separately) to the 3.5mm jack, then to the radio.
• For the radios listed below: Connect the 3.5mm adapter to the 3.5mm jack.
• Eclipse: Brown - Brown/White/Brown/White - Brown
• Kenwood/JVC (with SWC wire): Blue/Yellow - Brown
• Metra OE: Key 1 (Gray) - Brown
• Universal "2 or 3 wire" radio: Key-A or SWC-1 - Brown/Key-B or SWC-2 - Brown/White
Note: After programming, assign SWC buttons within menu.
• XITE: SWC-2 - Brown
• For all other radios: Connect the 3.5mm jack to the radio.
• Connect the Red wire to accessory power.
• Connect the Yellow RCA jack labeled "To Reverse Camera Input (Radio)",
to the backup camera input. ‡
‡ Mandatory connection to retain parking sensor graphics
5
REV. 4/13/2021 INST95-9615B
Advertisement
