Advertisement
Inside Case
Vehicles without handlebar controls
1. From the 3.5mm adapter, tie the Brown and Brown/White
wires together and tape up or use a connector.
2. Connect the 3.5mm adapter to the 3.5mm jack from the
vehicle harness.
3. Program the interface per the instructions, page 8.
CONNECTIONS
Front
Rear View
AUX-IN
SWC
Rear
Sub
3.5mm Adapter (for radios with a wire for SWC)
Boss (with SWC wire): Key 1 (Gray) - Brown
Kenwood / JVC (with SWC wire): Blue/Yellow - Brown
XITE: SWC-2 - Brown
Universal Radio*: Key-A or SWC-1 - Brown
Key-B or SWC-2 - Brown/White
* After programming, assign SWC buttons within radio menu
Fuse
Yellow - Battery power
Black - Ground
Red - Accessory power
Orange - Illumination
Blue - Power antenna
Gray - Front right speaker (+)
Gray/Black - Front right speaker (-)
White - Front left speaker (+)
White/Black - Front left speaker (-)
Green - Rear Left speaker (+)
Green/Black - Rear Left speaker (-)
Purple - Rear Right speaker (+)
Purple/Black - Rear Right speaker (-)
REV. 12/2/21 INSTBC-HDR-K3
7
Advertisement
