Page 2
DASH DISASSEMBLY 1. Unclip the right side of the driver’s knee 5. Remove the climate control panel. bolster panel next to the center console (Figure D) and let hang. (Figure A) 6. Remove the a/c vent panel. (Figure E) Note: There is no need to completely 7.
Page 3
KIT ASSEMBLY 1. If equipped with automatic climate controls, secure the climate module removed in Dash Disassembly, to the radio brackets, using the factory hardware. (Figure A) 2. Slide the radio into the completed assembly, and then secure it using the screws supplied with the radio.
Page 6
DESMONTAJE DEL TABLERO 1. Desenganche el lado derecho del panel 5. Quite el panel del control del clima. protector de rodillas del conductor junto (Figura D) a la consola central y déjelo colgando. 6. Retire el panel de ventilación de aire. (Figura A) (Figura E) Nota: No es necesario quitar el panel...
Page 7
ENSAMBLE DEL KIT 1. Si está equipado con controles de clima automáticos, asegure el módulo de clima removido en el Desmontaje del tablero, a los soportes de radio, utilizando el hardware de fábrica. (Figura A) 2. Deslice el radio en el ensamble terminado y sujételo al ensamble con los tornillos suministrados con el radio.