Advertisement
1. Unclip and remove the a/c vent panel to
the left of the radio. (Figure A)
Tip! A long-hook too can be inserted
into the vent to grab it from the back.
2. Unclip and remove the passenger-side
dashboard trim panel. (Figure B)
3. Remove (4) T-27 Torx screws securing
the radio. (Figure C)
2
DASH DISASSEMBLY
(Figure A)
(Figure B)
4. Carefully remove the hinged door
covering the DVD drive. (Figure D)
5. With the parking brake on, put the gear
shifter in reverse to allow the radio to be
removed in the following step.
6. Unclip and slide the radio assembly out,
then unplug and remove.
Continue to Kit Assembly
(Figure C)
(Figure D)
|
386.257.1187
MetraOnline.com
Advertisement
