Use Interface - Eighteeth Fast-Fill User Manual

5.Use Interface

1
2
3
4
5
Main switch
①
Indicator light
②
Display Screen
③
Set switch
④
Power switch
⑤
5 Use Interface
Turn Power On
Long press
Change Memory
Shot press
memory from T1 to T3.
Memory Parameter Setting
During standby state, holding down press
more than 2 seconds to enter
memory parameter setting. Parameter T1
to T3 can be set independently. Press
till target setting, press
press to confirm.
Heating
During standby state, shot press
the indicator light flashes.
Stop heating
During heating state, shot press
Pushing out Gutta-percha
When the heating is completed, the
indicator light will be on. Holding down
press .
Turn Power Off
Long press
Advanced setting
During power off state, holding down
press then press
advanced setting. Press
setting, press
to confirm.
12 / 37
.
to change temperature
to adjust, then
more than 2 seconds.
to enter
till target
to adjust, then press
and
.