Table of Contents
Advertisement
External Connectors
Figure 2-2 shows the connectors at the rear of the unit. Each connector is
labelled by a small symbol moulded into the plastic on the underside of the
unit.
1
1
The line socket accepts the cable from the user's telephone line.
2
The telephone socket accepts the adaptor cable (part number
485229) which connects the user's telephone.
3
This socket accepts the cable from the plug top power supply.
4
When turned OFF this switch prevents two-way conversations with
the monitoring centre except during an emergency call. (For use in
warden call applications only.) Also used to close down call. See p7 in
"PSION Programming Guide".
Concealed Connectors
Figure 2-3 shows the base of the unit.
1
1
Controls the volume of the loudspeaker in the base.
2
Knockout tabs for cables.
2
Figure 2-2 Rear Connectors
Figure 2-3. Homelink's Base
3
4
496758
3
2
Page 7
Advertisement
Table of Contents
