Fault Finding - Cooper Scantronic HOMELINK EXTRA Installation & Programming Manual

INDICATION
Power Lamp
OFF.
Line Fail lamp
flashing.
Cannot dial
numbers.
All lamps OFF.
All lamps
FLASHING.
Power lamp
FLASHING.
Note: If the unit still fails to operate, contact the helpline number (see back cover).

8. FAULT FINDING

POSSIBLE
CAUSE
Mains power
disconnected.
Telephone line
disconnected.
Dialling too
soon.
Mains and
telephone line
disconnected.
Unit faulty.
Battery is low.
ACTION
Check that the mains adapter is
plugged in and the mains turned
ON.
Check connection at wall socket.
Check with telephone company
that line is connected.
Insert dial pause at beginning of
telephone number.
Homelink switches itself off when
both mains and telephone lines
are disconnected. The unit will
switch back on when the mains
supply is reconnected.
Switch off mains power to the
unit. Call your helpline number.
Switch mains back on. If mains is
ON then battery is dead. Replace
battery.
496758 Page 23