RS 125 - Tuono 125 - Euro 4
•
Release the clamp.
Remove the pipe and drain the coolant into a container of adequate capacity.
CAUTION
DO NOT DISPOSE OF THE FLUID INTO THE ENVIRONMENT.
FILLING THE COOLING SYSTEM
•
Reconnect the pipe on the engine fit-
ting, right side.
•
Refill the system with the quantity described in the technical characteristics.
CAUTION
CHECK THAT THE COOLANT LEVEL IS BETWEEN THE REFERENCE MARKS "MIN" AND "MAX"
Water pump
Removal
•
Remove the water pump and rotor cov-
er;
•
Remove the rotor;
Cooling system
COOL SYS - 313