RS 125 - Tuono 125 - Euro 4
•
Unscrew and remove the two screws,
and retrieve the respective nuts.
•
Unscrew and remove the nut, and re-
trieve the screw.
•
Remove the rear brake pump.
•
To reassemble, repeat the procedure
described above in reverse order.
(TUONO 125)
•
Remove the rubber O-ring and release
the stop on the rear brake pump com-
mand rod.
•
Unfasten the stop and remove it from
the rear brake pump command rod.
Braking system
BRAK SYS - 307