RS 125 - Tuono 125 - Euro 4
Installing
Where you need to replace the front brake lever:
•
Carry out a complete inspection of the
piston and the cylinder to check the
braking system is working properly.
Make sure no other component is dam-
aged.
•
Tighten the thrust screw on the lever
while gently reapplying Loctite 270.
•
Fit the assembled brake lever on the
pump body
•
Adjust the thrust screw to adjust the
brake lever to the rest position.
•
Check the clearance by measuring the free stroke of the brake lever, which should be 3 to
5 mm (A).
Braking system
BRAK SYS - 305