RS 125 - Tuono 125 - Euro 4
Installing the engine to the vehicle
•
Place the ring nut and tighten it to the
prescribed torque.
Specific tooling
866714 Swingarm adjustment
•
Insert the swingarm pin from the right
side and slide it until it reaches the oth-
er side.
•
Working from both sides, tighten the
upper screw with the relative washer.
•
Tighten the screw to the prescribed tor-
que.
•
Working from both sides, start the
through screw with the nut.
•
Tighten the screws to the prescribed
torque.
Engine from vehicle
ENG VE - 159