Braking system
When turning the wheel or acting on the brake, a variation of parameters must be detected.
ACTIVATION screen page
On this screen page, you can delete the errors
from the memory of the controller and you can en-
able some systems controlled by the control unit.
Diagnostic tool characteristics
ABS Warning Light
ERRORS screen page
This display shows potential errors detected in the
vehicle (ATT) or stored in the control unit (MEM)
and it allows to check error clearing (STO).
P.A.D.S. characteristic.
Comparison of front and rear wheel
BRAK SYS - 290
ACTIVATIONS
Value/example
Units of
measure
ment
-
-
ERRORS
Value/example
Units of
measure
ment
C1024
RS 125 - Tuono 125 - Euro 4
Notes
During the test the warning light flashes
Notes
Excessive difference