Braking system
•
Remove the complete ABS system.
REMOVAL OF MODULATOR / ABS CONTROL
UNIT
•
Remove the modulator as described
above.
•
Mark the pipes so that they can be cor-
rectly re-installed on the new modula-
tor.
•
The brake pipe with the RED sticker (A)
(ABS-front brake pump control unit):
mounted on the control unit, in corre-
spondence with the threaded hole
marked "MC". the red sticker must be
visible once the mounting procedure is
complete.
•
The brake pipe with the GREEN sticker
(A) (ABS-front clamp control unit):
mounted on the control unit, in corre-
spondence with the threaded hole
marked "F". the green sticker must be
visible once the mounting procedure is
complete.
•
After replacing the control unit or pipes,
the entire ABS system must be bled.
•
To bleed the ABS system in the best
possible way, we recommend using
devices such as vacuum pumps or
similar.
CAUTION
BRAK SYS - 286
RS 125 - Tuono 125 - Euro 4