OPTIBAR P 1010/2010
2.1 Description of device
The OPTIBAR P 1010 / 2010 pressure transmitters are designed to measure the absolute
pressure and gauge pressure in flammable and non-flammable gases and liquids.
2.2 Marking
The marking of the entire device is on the housing, where the following identification plate can be
found.
Figure 2-1: Example of an identification plate
1 Device type
2 Manufacturer
3 Note to observe the documentation
4 Manufacturer's website
5 ID number for the CE marking
6 Approvals-related connection data
7 Information relevant for Ex approval
8 Electrical connection data
9 Rating data: measuring range, MWP
01/2023 - 4002866802 - AD OPTIBAR P 1010_2010 R02 en
DEVICE DESCRIPTION
135
www.krohne.com
2
5