Table of Contents
Advertisement
OPTIBAR 5060
2.1 Description of device
The pressure transmitter of the OPTIBAR 5060 series is designed to measure the pressure of
vaporous, gaseous and liquid media.
2.2 Marking
2.2.1 Marking for ATEX
The marking of the entire device is on the housing, where the following identification plate can be
found.
Figure 2-1: Example for an ATEX nameplate for an OPTIBAR 5060
1 Observe the instructions
2 Marking of notified body and CE marking
3 Hardware version
4 Product name and type code
5 Permissible temperature range
6 Nominal range
Permissible process pressure
7 Electronics power supply and signal output
8 Ingress protection and material of wetted parts
(Diaphragm, process connection, sealing and fill fluid)
9 Approvals and approval directive
04/2021 - 4005260702 - AD OPTIBAR 5060 Exta R02 en
TMAX: See manual and approval documents
9,6...30VDC
TÜV ATEX 162917 X
II 1D, 1/2D, 1/3D, 2D
Ex ta ia, ia/tb, ia/tc, tb ia IIIC TX°C Da, Da/Db, Da/Dc, Db
II 1/2/-D, 1/2D
Ex ia/ia/-, ia/tb ia IIIC TX°C Da/Db/-, Da/Db
VGK54ARDUSAGG0SHXA16XDD00K0X
HW Ver
1.0.0
PED
SEP
www.krohne.com
DEVICE DESCRIPTION
2022
2
5
Advertisement
Table of Contents
