Device Description; Description Of Device; Marking; Marking For Atex - KROHNE OPTIBAR 5060 eDP Supplementary Instructions Manual

OPTIBAR 5060

2.1 Description of device

The pressure transmitter of the OPTIBAR 5060 series is designed to measure the pressure of
vaporous, gaseous and liquid media.

2.2 Marking

2.2.1 Marking for ATEX

The marking of the entire device is on the housing, where the following identification plate can be
found.
Figure 2-1: Example for an ATEX nameplate for an OPTIBAR 5060
1 Observe the instructions
2 Marking of notified body and CE marking
3 Hardware version
4 Product name and type code
5 Permissible temperature range
6 Nominal range
Permissible process pressure
7 Electronics power supply and signal output
8 Ingress protection and material of wetted parts
(Diaphragm, process connection, sealing and fill fluid)
9 Approvals and approval directive
04/2021 - 4003591803 - AD OPTIBAR 5060 Exia R03 en
TMAX: See manual and approval documents

DEVICE DESCRIPTION

HW Ver 1.0.0
PED SEP
www.krohne.com
2022
2
5