7.3
General key functions and pilot lamps
Your Alpha Thermostat is easy to operate.
Enter Key
Smart Decrement / Increment Button
26
/
(or 4 sec.)
and
Switch from the current bath temperature display to
the main menu;
activates input, display flashes;
saves input, display ceases to flash and menu point is
left.
Selection of sub menu or setting of numerical values.
Speeds up entry by moving the counting position to the
left:
Keys are pressed and held down.
Moves counting position to the right:
Switching one place to the right occurs by briefly
(1 second) releasing the key, followed by another
pressing of the key.
Most relevant settings are accepted automatically after
approximately 4 seconds
or
the setting is accepted immediately pressing the <En-
ter> key.
Fault signal: Flashing red Alarm LED and acoustic
signal.
Heating is active when the yellow LED is lit.
Cooling is active. When the setpoint temperature is
lowered, it may take up to one minute before the blue
LED is lit.
Starting up
Alpha
June 20, 2018/ YACE0092