Auto Data Rate Configuration Menu - GE MDS iNET Series Reference Manual

Figure 2-36. Skip Zone Options Submenu—MDS iNET Only
("Commit changes" displayed only on Access Point radios)
Figure 2-36 displays the utilization of 10 zones, each having eight RF operating frequencies.
Zones can be toggled between
the zone to be changed, then pressing the spacebar to toggle between the two options for each
zone. Select
Commit Changes
the network through the AP's beacon signal.
With an iNET radio (non-iNET-II), a maximum of three zones may be skipped to be compliant
with FCC regulations.

2.5.5 Auto Data Rate Configuration Menu

The Auto Data Rate Configuration submenu is typically for use in environments where signal quality is vari-
able, and you wish to maintain the highest possible over-the-air data rate as conditions change.
05-2806A01, Rev. L
and at Access Points by first keying in the letter of
Active Skipped
to implement changes. These changes are forwarded to all units in
MDS iNET Series Reference Manual 45