Navigating Via Web Browser; Logging Out Via Web Browser; Basic Device Information; Starting Information Screen - GE MDS iNET Series Reference Manual

Navigating via Web Browser

Navigating with a Web browser is straightforward with a framed "homepage." The primary navigation
menu is permanently located on the left-hand side of this page. Simply click on a desired menu item to bring
it to the forefront.
NOTE:
To maintain security, it is best to log-out of the menu system entirely when you are done working
with it.

Logging Out Via Web Browser

Click on in the left-hand frame of the browser window. The right-hand frame will change to a logout
Logout
page. Follow the remaining instructions on this screen.
NOTE:
In the menu descriptions that follow, parameter options/range, and any default values are
displayed at the end of the text between square brackets. Note that the default setting is always
shown after a semicolon: [

2.3 Basic Device Information

This section contains detailed menu screens and settings that you can use to specify the behavior of the unit.

2.3.1 Starting Information Screen

Once you have logged into the Management System, you will be presented with a screen that provides an
overview of the transceiver and its current operating condition. It provides an array of vital information and
operating conditions.
• —Current operating mode of the unit as it relates to the radio network.
Device Mode
Dual Remote, Serial Remote, Ethernet Remote]
• —This is a user-defined parameter that will appear in the heading of all pages.
Device Name
(To change it, see "Network Configuration Menu" on Page 27.)
NOTE:
Do not use a colon (:) or percent (%) symbol in the device name.
• —The name of the radio network in which the unit is associated [
Network Name
].
Not Programmed
22
available settings or range; default setting
Figure 2-9. Starting Information Screen
MDS iNET Series Reference Manual
]
[Access Point,
9 to 15 characters
05-2806A01, Rev. L
;