Authorization Key Menu; Change The Type Of Remote - GE MDS iNET Series Reference Manual

2.9.3 Authorization Key Menu

(iNET-II image shown; iNET omits Encryption option)
•
Authorization Key
memory.
•
Authorized Features
MDS iNET-II radios will show an additional selection called
Additionally, the user can enter an authcode directly from the login prompt by entering 'authcode' as the
password. This will then display the radios's serial number and prompt the user for the authcode. To exit
the authcode menu without entering an authcode, simply press the

2.9.4 Change the Type of Remote

For iNET-900 units only enter the serial number of the unit to be changed in the
Serial Gateway Remote into an Ethernet Bridge Remote, or vice-versa.
05-2806A01, Rev. L
Figure 2-79. Authorization Key Menu
—Initiate the entering of an Authorization Key into the transceiver's non-volatile
—List of authorized features available for use [
Figure 2-80. Login Prompt Authcode Entry
MDS iNET Series Reference Manual
,
enabled disabled
under Authorized Features.
Encryption
key.
Enter
field to turn a
Auth Key
].
89