GE MDS iNET Series Reference Manual page 139

Size (Excluding mtg. hardware):
Mounting w/Optional Hardware:
Weight:
Case:
Boot Time:
Time Required to Associate
with Access Point:
APPROVALS/HOMOLOGATION
MANAGEMENT
DATA CHARACTERISTICS
PORTS:
Ethernet:
Interface Connectors:
Data Rate:
Serial (2 Ports):
Signaling Standard:
Interface Connectors:
Interface:
Data Rate:
Data Latency:
Byte Formats:
OPERATING MODES:
05-2806A01, Rev. L
1.25" x 6.75" x 4.5" (H x W x D)
3.15 x 17.15 x 11.43 cm
• DIN Rail
• Flat surface mounting brackets
• 19" rack (1U high)
908 g / 2 lb
Cast Aluminum
 30 sec
 20 sec
• FCC Part 15.247
iNET FCC identifier: E5MDS-NH900
iNET-II FCC identifier: E5MDS-INETII
• Industry Canada RSS-210
iNET certification no.: 3738A 12098
iNET-II certification no.: 3738A-INETII
• UL/CSA Class 1, Div. 2; Groups A, B, C and D hazardous locations
• Complies with the following IEEE Standard: 1613
Networking Devices in Electric Power Substations classifications:
4.1.1 Environmental Class B
4.1.2 Environmental Storage Class A
7.12 Device Performance Class 1
• Contact factory for information on availability and governmental approvals in other
countries
• HTTP, HTTPS (Embedded Web server)
• Telnet, SSH, COM1 serial port (Text-based menu)
• SNMP v1/v2/v3
• SYSLOG
• GE MDS PulseNET
RJ-45 Standard
10BaseT (10 Mbps)
EIA-232/V.24
DB-9
COM1: DCE / COM2: DTE
1200–115,200 bps
asynchronous
< 10 ms typical
7 or 8-bit; even, odd, or no-parity; 1 or 2 stop bits
• Configurable as Access Point or Remote Station
MDS iNET Series Reference Manual

-2003 Communications
127