View Current Alarms; View Event Log - GE MDS iNET Series Reference Manual

• —GEMDS debug file containing system information helpful in radio debugging. See
Support Bundle
"Support Bundle" on Page 92.

View Current Alarms

Most events, classified as "critical" will make the PWR LED blink, and will inhibit normal operation of the
transceiver. The LED will remain blinking until the corrective action has been completed.
An alarm condition is different from a log event in the sense that an alarm is persistent in nature. That is, an
alarm condition remains as an alarm until it has been cleared by correcting the cause (see Table 3-6 on
Page 100 for corrective action).
Figure 2-61. Current Alarms Screen

View Event Log

Event classifications are listed starting in Table 3-4 on Page 99 to Table 3-7 on Page 102.
Figure 2-62. Sample Event Log Screen
05-2806A01, Rev. L MDS iNET Series Reference Manual 73