Creating The 3Rd Generation Intel® Xeon® Scalable Processors Carrier Assembly - Supermicro SuperServer SYS-210SE-31D User Manual

Creating the 3rd Generation Intel® Xeon® Scalable processors
Carrier Assembly
To install the model processor into the processor carrier, follow the steps below:
1. Hold the processor with the LGA lands (gold contacts) facing up. Locate the small, gold
triangle in the corner of the processor and the corresponding hollowed triangle on the
processor carrier. These triangles indicate pin 1. The triangles can be found on the top
and bottom of the processor. See the images below.
2. Using the triangles as a guide, carefully align and place Point A of the processor into the
carrier. Then gently snap-in the other side of the carrier for the processor to fasten into
Point B.
Note: The processor carrier contains four metal rings on each corner.
3. Examine all corners to ensure that the processor is firmly attached to the carrier.
B
Pin 1
Note: The following CPU carriers have been successfully tested in our labs and are available
from Supermicro. Please order the CPU carriers with the CPU heatsink.
Intel 4th Generation Xeon
Scalable Processors
Chapter 3: Maintenance and Component Installation
A
A
Pin 1
B
Pin 1
SKT-1205L-P4IC-FXC
SKT-1205L-P4IC-TYC
31
Allow carrier to
fasten onto CPU
Allow carrier to
fasten onto CPU
Processor Carrier Assembly
Allow carrier to
fasten onto CPU
Allow carrier to
fasten onto CPU