Table of Contents
Advertisement
After the hardware has been installed, you can install the Operating System (OS), configure
RAID settings and install the drivers.
5.1 Microsoft Windows OS Installation
If you will be using RAID, you must configure RAID settings before installing the Windows
OS and the RAID driver. Refer to the RAID Configuration User Guides posted on our website
at www.supermicro.com/support/manuals.
Installing the OS
1. Create a method to access the Microsoft Windows installation ISO file. That can be a
USB flash, media drive, or the BMC KVM console.
2. Retrieve the proper RST/RSTe driver. Go to the Supermicro web page for your
motherboard and click on "Download the Latest Drivers and Utilities", select the proper
driver, and copy it to a USB flash drive.
3. Boot from a bootable device with Windows OS installation. You can see a bootable
device list by pressing <F11> during the system startup.
Chapter 5
Software
Figure 5-1. Select Boot Device
57
Chapter 5: Software
Advertisement
Table of Contents
Troubleshooting
