Installing The Rails - Supermicro SuperServer SYS-210SE-31D User Manual

2.4 Installing the Rails

Rack units on the market may require a slightly different assembly procedure.
Included set of rails:
MCP-290-20101-0N (2U fixed rail set, quick release, default for 2, 3U, 17.6"W, 18.5-22)
Optional:
MCP-290-00144-1N (2U fixed rail set, quick release, default for 2, 3U, 17.6"W, 26.5-33.5)
The following is a general guideline for installing the system in a rack using the rack mounting
hardware supplied. Read the installation instructions that came with the rack you're using.
Installing the Rails
1. Using the provided screws, attach the inner rail of the right rail set (marked with an "R")
to the rack's rear right side.
2. As illustrated above, attach the outer rail of the right rail set to the front right side of the
rack using the supplied screws.
3. Repeat steps 1-2 for the other left rail set (marked with an "L").
Figure 2-2. Installing the Rails
22
Chapter 2: Server Installation
Left
Right