Enable/Disable Config Map; Disable Config Map; Enable Config Map; Port Info - Garland P10GMSFE-5 User Manual

Enable/Disable Config Map

Config maps may be enabled or disabled as desired. If a config map is enabled, it is in the database and
available for traffic. If a config map is disabled, it is in the database and not available for traffic. If the
config map has a green check, then it is enabled. If the config map has a red dash, then it is disabled.

Disable Config Map

1. Select the green check for the config map in the Enable column.
The green check will change to a red dash.
2. Select Save.

Enable Config Map

1. Select the red dash for the config map in the Enable column.
The red dash will change to a green check.
2. Select Save.
The red dash will change to a green check.
3. Select Save.

8. Port Info

The following configuration options may be displayed or modified under the Port Info panel.
Port Number
Port Description
Link
Set Speed
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2023 Garland Technology, LLC. All rights reserved.
Speed
Mode
SFP Data
User Guide
XtraTAP | P10GxxFE-X | 4.22.1
45