Garland EdgeSafe M10GMSBPv2 User Manual
  1. Manuals
  2. Brands
  3. Garland Manuals
  4. Switch
  5. EdgeSafe M10GMSBPv2
  6. User manual

Garland EdgeSafe M10GMSBPv2 User Manual

10g bypass modular network tap
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
10G Bypass Modular Network TAP 
M10GMSBPv2 / M10GSSBPv2 / M10GESBPv2 / M10G1ACv2 / M10G1DCv2 
 
 
For questions, please contact Garland Technology Support
EdgeSafe​
User Guide By Garland Technology
8AM-9PM (CST) Monday - Friday (Except for observed US
Tel: 716.242.8500 Online: ​ w ww.garlandtechnology.com/support 
Garland Technology: Modular Bypass System  
Firmware Rev Level: 0.​ 3 .3.2 
Office:
garlandtechnology.com/support
garlandtechnology.com
 
 
 
716-242-8500 
TM
 
 
at: 
Holidays) 
 
 
 
 

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EdgeSafe M10GMSBPv2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Garland EdgeSafe M10GMSBPv2

Summary of Contents for Garland EdgeSafe M10GMSBPv2

  • Page 1 M10GMSBPv2 / M10GSSBPv2 / M10GESBPv2 / M10G1ACv2 / M10G1DCv2          For questions, please contact Garland Technology Support at:  8AM-9PM (CST) Monday - Friday (Except for observed US Holidays)  Tel: 716.242.8500 Online: ​ w ww.garlandtechnology.com/support  Garland Technology: Modular Bypass System  ...
  • Page 2 Update Spec and order information PN for IBSP – HW with power supply trap  capabilities  2.8  17-Oct-13  Added support for Reporting of RX/TX errors in the Web interface / CLI.   Added support for disconnect mode at power off  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 3 Added support for management port vlan  Add support for cli tab to complete the command    Notes: Several new features supported only with new HW devices (EdgeSafe hardware version 0.3.0.0  and up).      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 4: Table Of Contents

    IV. TURN ON THE DC POWER SOURCE THE PWR LEDs ON THE FRONT PANEL OF THE IBS WILL  ILLUMINATE..............................26  5.4 CONNECTING THE RS232 DB9 MANAGEMENT CABLE ................. 27  5.5 CONNECTING THE ETHERNET MANAGEMENT PORT................27  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 5 6.35 DISPLAY/CHANGE RS232 TERMINAL PORT SPEED (SHOW/SET_RS232_SPEED) ......51  6.36 DISPLAY ETHERNET PORT STATE (SHOW_LINK) ................52  6.37 CHANGE ETHERNET PORT AUTO-NEGOTIATION STATUS..............52  6.38 DISPLAY DEVICE LOG FILE (SHOW_LOG) .................... 52  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 6 6.56.2 Set WEB user name..........................73  6.56.3 Set WEB user password ........................73  6.56.1 Disable/Enable WEB interface......................73  6.57 MULTI CONFIGURATION MECHANISM....................74  6.57.1 Display saved IBS configurations..................... 74  6.57.2 Save IBS configuration........................74  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 7 7.4 SNMP REQUEST EXAMPLES (NET-SNMP APPLICATION) ..............103  7.5 DISPLAYING LOG FILE VIA SNMP ......................103  7.6 SNMP AGENT, NET-SNMP AND COPYRIGHT ..................103  8 WEB INTERFACE ..........................104  8.1 STARTING WEB INTERFACE ........................104  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 8 9.2 INFO MENU .............................. 126  9.3 INFOMNF MENU: ............................. 127  9.4 OP MENU ..............................127  10 APPENDIXES ........................... 128  10.1 KEY FEATURES............................128  10.2 BYPASS SPECIFICATIONS........................129  10.3 PRODUCT DEFAULT SPECIFICATIONS ....................129  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 9 Figure: 13. IBS1U rear panel.......................... 25  Figure: 14. IBSSG – Stand-alone unit rear panel..................25  Figure: 15. MCB#RS232- RJ11 to DB9 Management serial cable.............140                  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 10: Introduction

    (with power supply trap  capabilities)  IBSGP-T  Gigabit Copper Intelligent Bypass Switch  1G – Copper  (with power supply trap  capabilities)  IBS1UP  Intelligent Bypass Switch 1U host system  1U host system  (with power supply trap  capabilities)    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 11: Features

    IBS sets from ​ B ypass ​ t o ​ I nline​ .     The IBS includes a "Double Safe" Bypass architecture. The Garland Technology "Double safe"  bypass architecture is based on two separate Bypass routing circuitries: An Active Bypass ...

  • Page 12: Application Failure (Heartbeat)

    As soon as the Monitor / Network appliance recovers  and starts transmitting back the heartbeat packets, the IBS will set to Normal / In-Line mode  after detecting the heartbeat packets for a period set by the "hb_holdtime" parameter.      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 13: Monitor Link Failure

    IBS will set to Normal / Inline mode state after detecting the heartbeat packets for the  period set by the "hb_holdtime" parameter.    The "hb_holdtime" parameter can be changed via management port from their initial default  mode.      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 14: Tapmode

    The IBS supports TAPI12 Mode, when it is enabled, incoming traffic in port NET0 is mirrored  to port MON0 and incoming traffic in port NET1 is mirrored to port MON1. Packets can be  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 15 EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  injected from port MON0 to port NET0 and from port MON1 to port NET1.        Figure: 4. EdgeSafe Bypass TAPI12 Mode.        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 16: Tapa Mode

    The IBS supports TAPA Mode, when it is enabled, incoming traffic in port NET0 is mirrored to  both monitor ports and incoming traffic in port NET1 is mirrored to both monitor ports.      Figure: 5. EdgeSafe Bypass TAPA Mode    2.9 TAPAI1 mode  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 17 NET1 is mirrored to both monitor ports.  Packets can be injected from port MON0 to both network ports.      Figure: 6. EdgeSafe Bypass TAPAI1 Mode.  2.10 TAPAI2 mode  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 18: Tapai2 Mode

    The IBS supports TAPAI12 Mode, when it is enabled, incoming traffic in port NET0 is mirrored  to both monitor ports and incoming traffic in port NET1 is mirrored to both monitor ports.  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 19: Tapai12 Mode

    Figure: 8. EdgeSafe Bypass TAPAI12 Mode  2.12 Linkdrop mode  In Linkdrop mode the IBS disables the links on the network ports (NET0, NET1). The IBS  simulates switch / router cable disconnection.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 20: Two Port Link (2Pl)

      2.14 Restore from active expire state  The IBS supports manual and auto restoring from heartbeat expiration event.    2.15 Heartbeat active mode  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 21: Restore From Active Expire State

    By default Heartbeat active mode is not preserved after reset or after power off cycle. The  Heartbeat active mode can be configured to be preserved after reset or power off cycle by  enabling the keep_hb_act_mode parameter.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 22: Front Panels

    1G port on the IBSG).  Ethernet network port 1 – port to connect network device (10G port on the IBS10G and  1G port on the IBSG).  Push button 1 – EdgeSafe Bypass TAP management button 1  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 23 Network port 1 link (LK) LED – indicate network link for network port 1.  LCD – indicate EdgeSafe Bypass TAP current status.  Push button 0 – EdgeSafe Bypass TAP management button 0  Power ON (PWR) LED – indicate power ON.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 24: Ibs1U - Ibs1U With 4 Ibs Modules

              Figure: 11. EdgeSafe with 4 modules    3.3 IBSSU – IBS standalone unit - front panel          Figure: 12. EdgeSafe IBSSG front panel    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 25: Rear Panels

    Figure: 13. IBS1U rear panel    4.2 EdgeSafe IBSSU – IBS standalone unit rear panel                Figure: 14. EdgeSafe IBSSG - Stand alone unit rear panel    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 26: Edgesafe Bypass Tap (Ibs) Installation

    Connect 0V return to "+" terminal IBS ( center)  Connect -48V wire to "-" terminal ( right) IBS  iii. Turn on the DC power source The PWR led that is on the front  panel of the IBS will illuminate    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 27: Connecting The Rs232 Db9 Management Cable

    - Gateway: 192.168.0.1  - Login name: admin  - Password: gtadmin1  4. The following are default snmp user/community name and password (for snmp 3 and  TACACS+)    - user/community name: admin  - password: gtadmin1  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 28: Command Line Interface (Cli)

    It cannot include space symbols.    Tip: In case of entering a partial command the IBS will display all the commands which  contain this part.    6.1 Main menu        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 29: Commands List

      Exit - Exits from CLI and ends session (logoff). Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 30: Heartbeat Active Mode. (Hb_Act_Mode)

    ● If “keep_hb_act_mode” is OFF the heartbeat active mode is always ON after power on  or restart event.  ● If “keep_hb_act_mode” is ON the heartbeat active mode preserves its state after power  on or restart event.      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 31: Active Bypass Mode

    When in Bypass, in any event of power off the IBS                                   Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 32: Power Off State (Pwoff_Status)

                    heartbeat hold time.    The " hb_interval " value is preserved after reset and power off events.    Example:            Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 33: Hb_Holdtime (Hb_Holdtime)

    When the keep_hb_act_mode is OFF the state of heartbeat  active mode is automatically set to ON after reboot or after power on.    Default value of the keep_hb_act_mode is OFF ( disabled).    Example:        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 34: Heartbeat Expiration State (Hb_Exp_State)

    When the IBS does not receive the heartbeat packet within the hb_holdtime time it will set  the Active Bypass circuitry to the state that was set by the hb_exp_state (Bypass, Tap, Tapi12,  Tapa, Tapai1, Tapai2, Tapai12 or linkdrop mode).    Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 35: Restore From Heartbeat Expiration Event (En_Act_Hb_Restore)

    The following actions should be taken to restore the normal operation:  ● Restore the external environment to normal work.  ● Send command “set_bypass_mode inline”  ● Send command “set_hb_act_mode on”    Example:       Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 36: Change Bypass State On Rx/Tx Error Detection (Rx_Tx_Err_Mode)

    6.11 Change Bypass state on RX/TX error detection (rx_tx_err_mode)   The IBS can place itself into Bypass or Linkdrop in case it detects RX/TX errors on the Monitor  ports or on the Network ports.    Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 37: Selective Bypass Filter

    For MLPS and IP - it is possible to set the upstream (net0 to Net1)  or/and downstream (Net1 to Net0).  Selective bypass commands: set_slct_bypass - enable/disable , show_slct_bypass ,  add_slct_bypass , del_slct_bypass    Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 38   USER GUIDE   EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 39: Advanced Link Modes

    The IBSG (Copper and Fiber ) supports two ports link. When enabled (on), if one of the  network ports link fails it drops the link on the other network port. Two ports link is  disabled (off) by default.  Example:          Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 40: M2N Mode

    M2M (monitor ports two port link) When enabled (on), if one of the monitor ports link  fails it drops thelink on the other monitor port. M2M k is disabled (off) by default  Example:    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 41: Advanced_Link (Available On The Ibs 1G/10G Fiber)

    The IBS default internal Vlan Id is :1 .  Using the command set_int_vlan it is possible to set the internal vlan id  To command show_int_vlan_id display the current internal vlan id  Example:    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 42: Ethernet Management Port Ip Address

    ● New net mask address will take effect only after performing device reboot.  ● Remote control via telnet, SSH, WEB or SNMP applications should be reconfigured to  use new net mask address    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 43: Ethernet Management Port Gateway Ip Address

    ● Remote control via telnet, SSH, WEB or SNMP applications should be reconfigured to  use new gateway addresses.    6.17 Ethernet management port VLAN ID   The VLAN id for the Ethernet management port can be modified show/set_mgmt_vlan.  Example:          Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 44: Time

    To change the IBS date and time use the command “set_time mm DD HH MM YYYY”  Where:  ● mm - month,  ● DD - day,  ● HH - hour ( 24 hours format),  ● MM - minute,  ● YYYY -year    Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 45: System User (Set_User)

    6.21 System password (set_psw)   To change the IBS system password (factory default is “gtadmin1” ) Use the command  “set_psw”. The new password will take effect after the next login.  Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 46: Unit Name

    Blink the S.OK LED on the currently controlled IBS unit in order to identify the relevant unit.  Example:      6.24 Display IBS versions (show_ver)  Display the IBS hardware, firmware and software versions.  Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 47: Display Ibs Parameters (Show_Params)

      USER GUIDE   EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  6.25 Display IBS parameters (show_params)  Show the current IBS parameters values.  Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 48: Display Ibs State (Show_Dev_State)

    EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  6.26 Display IBS state (show_dev_state)  Show the current IBS Bypass and operational mode state.  Note: This command resets the Alarm LED.    Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 49: Display Device Alert Status

    6.28 Display device firmware version (show_fw_ver)  Device firmware version is the generalized version that allows you to determine versions of  all software components.  Example:      6.30 Display device Tracking number (show_dev_tk_num )  Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 50: Display Device Fan State (Show_Fan_Status)

      6.32 Displaying power supplies states.  The command show_power_state displays the status of the 1U chassis power supplies  This command is supported only with hardware version 0.3.0.0.11 and up.  Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 51: Display Application State (Show_Appl_State)

    6.35 Display/change rs232 terminal port speed (show/set_rs232_speed)  Default rs232 port speed set to 115200. It can be changed to 9600. Changing rs232 port  speed requires rebooting the device.    Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 52: Display Ethernet Port State (Show_Link)

    ● MON1 – monitor port 1  ● NET0 – network port 0  ● NET1 – network port 1  Example:      6.38 Display device log file (show_log)  The command show_log displays the IBS log file.  Example:    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 53: Reset Log File (Reset_Log)

      Example:      Example:      6.40 Reset error condition (reset_err)  The Command “reset_err” is used to reset error conditions in the IBS.    Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 54: Set Default Parameters (Set_Default)

    ● System user: admin  ● System user password: gtadmin1  ● Heartbeat packet transmit direction: mon0  ● Heartbeat packet fail criteria: unidir  ● Ethernet Management port parameters: auto  ● Remote log state: disabled  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 55 ● Tacacs state: off  ● Tacacs server IP: 192.168.0.6  ● Tacacs fallback: off  ● Tacacs multi users: off  ● WEB user name: admin  ● WEB user password: gtadmin1  ● Tacacs secret key: default_tac_key      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 56: Firmware Update

    It enable the user to replace individual IBS module while the rest of the IBS modules on the  same 1U chassis are powered on up and running.  This command is supported only with hardware version 0.3.0.0.11 and up.  Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 57: Show/Set Web Https State (Web_Https_State)

    - tftp_server_root - tftp server root directory    Example:      6.46.1​ Restore the factory default certificate for the web UI (set_cert)  To restore the factory default certificate use the command restore_cert.  Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 58: Show/Set Management Session Timeout (Session_Exp_Time)

    The IBS Ethernet management port can be disabled /enabled (factory default = enabled)  When enabled all management operation can be performed remotely via this port.  When disabled – WEB interface, SNMP, Telnet, SSH management protocols are disabled.    Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 59: Show/Set Ethernet Management Port Parameters (Mgmt_Port_Params)

    6.49 Show/Set Ethernet management port parameters (mgmt_port_params)  The IBS Ethernet management port can set to auto negotiation mode or to force 10 Mbit/s  half duplex mode (factory default = auto)    Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 60: Show/Set Snmp Traps Enable State. (Show/Set_Trap)

    ○ error - error happened trap, power supply restored, CPU fan restored.  ○ update - update finished trap.  ○ all - all traps.    SNMP trap enable state can be obtained by the show_en_trap command. Command does not  Show parameters.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 61   USER GUIDE   EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2          Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 62: Heartbeat Packet

    The user MUST include this field when  preparing heartbeat packet  Packet content  Any data can be included    Checksum place holder  00 00 00 00  Real packet checksum will put here.          Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 63: Show/Set Heartbeat Packet Transmit Direction

    Heartbeat packets can be transmitted from either MON0 or MON1 or from both ports.  By default the heartbeat packets are transmitted from MON0 port and are received by  MON1 port.  Example:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 64: Show/Set Criteria For Determining Heartbeat Packet Failure

    The IBS will restore to its default state if at least one of the monitor  ports receives the heartbeat packets.                        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 65: Remote Log

    The Remote log server IP can be retrieved by command “show_remote_log_server_ip”.  Default remote log server IP: 192.168.0.6.  Example:      6.52.4​ Set remote log server IP  The IBS remote log server IP can be set by command “set_remote_log_server_ip”.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 66: Ntp (Network Time Protocol)

    The NTP server IP can be retrieved by command “show_ntp_server_ip”.  Default NTP server IP: 192.168.0.6.      6.53.4​ Set NTP server IP  The IBS main NTP server IP can be set by command “set_ntp_server_ip”.      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 67: Add Ntp Server Ip

    EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  6.53.5​ Add NTP server IP  Add NTP server IP      6.53.6​ Delete NTP server IP      6.53.7​ Send NTP request  Force NTP request using the command send_ntp_request    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 68: Timezone

    The Command timezone can retrieve time zone group  names, all time zones in group, all time zones or all time zones which names contain  some characters.          Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 69: Show Timezone

    6.54.3​ Set timezone  Several time zones supported daylight saving changes. When setting time zone the  daylight saving mode can be disabled or enabled. Also can be set timezone GMT-/+ X  from “Etc” group.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 70: Show Daylight Saving State

    USER GUIDE   EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2      6.54.4​ SHOW daylight saving state  Daylight saving state can be retrieved by command “show_daylight_state”.        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 71: Show Technical Support Information

    EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  6.55 SHOW technical support information  The command gathers all the necessary information needed for the Technical Support team  in order to help resolve technical problems.          Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 72   USER GUIDE   EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 73: Web User

    WEB user password can be set by command “set_web_user_psw”.      6.56.4​ Disable/Enable WEB interface  The command set_web is used to disable/enable WEB interface.  The command show_web is used for displaying WEB interface state.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 74: Multi Configuration Mechanism

    “show_list_conf”).  After restoring configuration the IBS must be rebooted.      6.57.4​ Remove saved configuration  The command “remove_conf” is used to remove saved configuration from the Flash  memory.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 75: Telnet Access

    The IBS supports the Telnet protocol. By default the Telnet access is enabled.  The Command “show_telnet_state” is used to retrieve telnet access state.  The Command “set_telnet_state” is used to enable or disable telnet access.              Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 76: Ssh Access

    The IBS supports SSH protocol. By default the SSH access is enabled.  The Command “show_ssh_state” is used to retrieve ssh access.  The Command “set_ssh_state” is used to enable or disable ssh access.        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 77: Statistics Counters

    8  TxPktGood  snmpEtherStatsTXNoErrors  RFC 1757  9  TxUnicastPkts  snmpIfHCOutUcastPkts  RFC 2233  10  TxMulticastPkts  snmpIfHCOutMulticastPkts  RFC 2233  11  TxBroadcastPkts  snmpIfHCOutBroadcastPckts  RFC 2233  12  RxDiscards  snmpIfInDiscards  RFC 1213  13  TxDiscards  snmpIfOutDiscards  RFC 1213      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 78: Tacacs+ (Terminal Access Controller Access Control System Plus) Support

    TACACS+ server.  TACACS+ state can be retrieved by command “show_tacacs_state”.      6.61.2​ Set TACACS+ server IP  The IBS supports multi TCACS servers, the command set_tacacs_server_ip sets the  main TACACS+ server.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 79: Add Tacacs+ Server Ip

    TACACS+ servers using the command add_tacacs_server_ip      6.61.4​ Del TACACS+ server IP  TACACS+ server IP can be deleted from the TACACS+ server list using the command :  del_tacacs_server_ip (Main TACACS+ server cannot be deleted).      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 80: Show Tacacs+ Server Ip

    By default there is no TACACS+ server login validate for RS232 access.  The command set_rs232_tacacs_login enable/disable the TACACS+ login validation for  RS232 access      6.61.7​ SHOW RS232 TACACS+ login  The TACACS+ RS232 access status can be retrieved by command:  “show_rs232_tacacs_login”      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 81: Set Tacacs+ Login Fallback

    6.61.9​ SHOW TACACS+ login fallback  TACACS+ login fallback status can be retrieved by command “set_tacacs_login_fallback”      6.61.10​ Set TACACS+ secret key  TACACS+ secret key can be set by command “set_tacacs_key”     Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 82: Set Tacacs+ Multi Users Flag

    The IBS TACACS+ Authorization defines 2 user levels.  Read only. Read/write    6.61.13.1 set_authorization_state  By default the TACACS+ authorization is disabled.  The command set_authorization state on/off enable/disable the TACACS+   Authorization.        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 83: Permitted Ip Support

      6.62.2​ Display permitted IP range  Permitted IP range can be displayed by command “show_ mgmt_permit_ip”    6.62.3​ Check permitted IP range  Permitted IP range can be checked by command “check_mgmt_permit_ip”    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 84: Snmp

    To view the current SNMP entry or the view all entries use the command:show_snmp_entry  [entry_index|all] -  show current snmp entry,  all - show all entries,  1 - 11 - show correspondent entry              Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 85: Add_Snmp_Entry

      USER GUIDE   EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  7.1.1​ add_snmp_entry -  Add new SNMP entry (up to 11 different entries)        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 86: Select Snmp Entry - Sel_Snmp_Entry

    In order to modify the SNMP entry, select the entry from the list of current active  entries which showed by the show_snmp_entry  sel_snmp_entry entry_index - select snmp entry (1 - 11)        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 87: Set/Show_Snmp_User

      USER GUIDE   EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  7.1.3​ Set/show_snmp_user  set_snmp_user XXX - set snmp user name (5 - 30 symbols).          Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 88: Snmp Version

    USER GUIDE   EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  7.1.4​ snmp version  set_snmp_ver XXX - set snmp version (1, 2c, 3, default - 1)  show_snmp_ver        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 89: Snmp Server Ip

    ● del_snmp_srv_ip - delete SNMP server IP from the current selected entry  ● set_snmp_srv_ip - modify the main SNMP server IP for the current selected entry    7.1.5.1 show_snmp_srv_ip  Show the SNMP servers IP for the current selected entry      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 90   USER GUIDE   EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  7.1.5.2 add_snmp_srv_ip        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 91   USER GUIDE   EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  7.1.5.3 del_snmp_srv_ip  Note: The main SNMP srv_ip cannot be deleted.        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 92 EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  7.1.5.4 set_snmp_srv_ip - modify the IP address of the main SNMP server  set_snmp_srv_ip xxx.xxx.xxx.xxx  - set MAIN snmp server ip address (default - 192.168.0.6).        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 93: Snmp Community Access - Show/Set_Snmp_Access

    Each entry supports different levels of access (read only, read/write, trap only, read  only with Trap.  ● set_snmp_access access - set snmp community access  ● read, read_write,  ● trap, read_trap, read_write_trap.  ● show_snmp_access                    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 94: Snmp Password - Set_Snmp_User_Psw

    - set_snmp_user_psw [OLD] NEW - set snmp user password (8 - 60 symbols).      7.1.8​ snmp community status (show/set_snmp_status)  The snmp_comunity_status activate or deactivate the SNMP entry  - set_snmp_status off/on   - set snmp community status.          Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 95: Snmp Trap Ip Port - Show/Set_Snmp_Trap_Port

    7.1.2​ SNMP MSG IP port - show/set_snmp_msg_port  Control the SNMP msg IP port  - set_snmp_msg_port XXX   - set snmp msg port (min - 1, max - 49151,default - 161).  - show_snmp_msg_port        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 96: Snmp Variables

    Set/Show SNMP server IP address. Take  effect after setting ibs SnmpApply  ibs SnmpUser  2.3  OCTET STRING  read-write    Set SNMP user/community and WEB  (SIZE(1..64))  interface user name. Take effect after  setting ibsSnmpApply  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 97 Remove device configuration. Set only the  variable, read will return zero.  SIZE(4..20))  2.27  OCTET STRING  read-only  ibsSysListConfig    Show saved device configurations.  (SIZE(1..2550))  3.28  read-only  ibsSysShowConfigNext  OCTET STRING    Show saved device configurations next  buffer.  (SIZE(1..2550))  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 98 (err/sec). Error rate threshold  value should be set more than zero  4.1  INTEGER  read-write  enable (1),  ibsConf2pl  Show/Set two-port link mode  disable (2)  4.2  INTEGER  read-write  ibsConfHbExpState  bypass(2),  Show/Set heartbeat expiration mode.  tap(3),  linkdrop(4)   Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 99 (2)  6.1  INTEGER  ibsRecoveryDefault  write  Restore system default parameter.    7.2  INTEGER  read-write  enable (1),  ibsTrapConfApplFail  Enable/Disable Showting trap info on  disable (2)  application failed/restored events status  change: ibs TrapApplFail /  ibsTrapApplRecover.  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 100 Enable/Disable SHOWting trap info on Log  disable (2)  size overflow: ibs TrapLogSize.  7.10  INTEGER  read-write  ibsTrapConfUpdate  enable (1),  Enable/Disable SHOWting trap info on  disable (2)  update finish event: ibsTrapUpdate,  ibsTrapUpdateReboot        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 101: Snmp Traps

    This trap is sent when CPU FAN restored from failure.  (only for hardware 0.3.0.00 and up)  ibsTrapRxTxError  32  This trap is sent when device detect RX or TX error.  Next trap can be send in 5 sec  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 102 49  This trap is sent when network port 1 was disable by 2pl/m2n  function  ibsTrapNet1Enable2plM2n  40  This trap is sent when network port 1 was enable by 2pl/m2n  function      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 103: Snmp Request Examples (Net-Snmp Application)

    SNMP v1 Show request:  snmpSHOW -v 1 -c admin 192.168.0.100 GARLAND-IBS-MIB::ibs TrapConfTerm.0   SNMP v1 set request:  snmpset -v 1 -c admin 192.168.0.100 GARLAND-IBS-MIB::ibs TrapConfTerm.0 = on  SNMP v2c Show request:  snmpSHOW -v 2c -c admin 192.168.0.100 GARLAND-IBS-MIB::ibs TrapConfTerm.0   SNMP v2c set request: ...

  • Page 104: Web Interface

    IBS parameters.  When the first user logs off from the WEB interface, the next user will receive all rights and  will be able to (Control /monitor) the WEB interface.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 105: Information Page

      USER GUIDE   EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  8.3 Information Page        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 106: Information Page For Device With Hardware 0.3.0.11 And Up

    ● Monitor ports link status (down/up)  ● Network port link status (down/up)  ● Rs232 management port connect status (connected/disconnected)    8.3.3.3 Error info  Error info area contains the first and last error (Hardware /software)  descriptions.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 107 ● Power supply (1 and 2) status (only for hardware 0.3.0.11 and up)  ● Box Fan status (1-6) (only for hardware 0.3.0.11 and up)    8.3.3.5 Status information  The Statistic information area contains network statistic information on the  different IBS ports:      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 108: Bypass Page

    When heartbeat active mode is set to OFF the IBS stops sending the heartbeats and  the Active Bypass circuitry can be set manually via the management port to one of the  following modes Normal (Inline), Active Bypass, TAP, TAPI12, TAPA,TAPAI1, TAPAI2,  TAPAI12 or Linkdrop.  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 109 The IBS generates a heartbeat packet to monitor PORT0 every “hb_interval” msec.  (default - 5, min - 3,max - 10000). Heartbeat interval should be at least 3 times less  than heartbeat hold time.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 110: Selective Bypass Filter

    ● Unidirectional: The IBS will change its state if one of the monitor ports do not  receive heartbeat packet. The IBS will restore to its default state when both  monitor ports receives the heartbeat packets.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 111: Rx/Tx Errors Processing

    Network ports.    8.4.4.1 Trap  ON/OFF - turn on or off the Trap on case of error detection.    8.4.4.1 Timeout  Set the timeout for sending the RX/TX traps.    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 112 8.4.4.4 Net  Change the Bypass mode to (none/linkdrop ) when number of errors per second on  NETx ports exceeds threshold    8.4.4.4 Rate threshold  RX/TX threshold : >0 (default - 10) err/sec    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 113: System Page

    IBS unit name (default unit name: ibs). Unit name can be up to 25 symbols    8.5.1.2 Telnet  The IBS supports Telnet protocol. The User can Enable/Disable the Telnet support (By  default the Telnet support is: off).    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 114: Tacacs+ Configuration Area

    IBS only via the Serial port.  By setting the TACACS+ fallback to on, it enable the login fallback to the local IBS  credentials.  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 115: Time Configuration Area

    8.5.5​ Ethernet management port area  8.5.5.1 System IP address  The System IP address is the Ethernet management port IP address. The New IP  address will take effect only after performing device reboot.Remote control via telnet,  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 116 When “remove” operation is selected, the “Permitted IP” window will display the  current permitted IP range that can be removed. The user can select one of the  IP ranges to be removed or to select “all” ranges.          Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 117: Account Page

    When the first user will be logged off from the WEB interface, the next user will receive his  rights and will be able to (Control /monitor) the WEB interface.        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 118: Snmp Page

    SNMP server IP. Each SNMP entry support up to 8 different SNMP servers  8.7.1.2 SNMP version  The IBS supports SNMP versions 1, 2c and 3.  SNMP version select box destined to change the SNMP version.        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 119: Access

    TrapTapai1On  i) ibs TrapTapai2On  j) ibs TrapTapai12On  3) Mon link enable/disable following traps:  a) ibs TrapMon0LinkDown  b) ibs TrapMon0LinkUp  c) ibs TrapMon1LinkDown  d) ibs TrapMon1LinkUp.  4) Net link enable/disable following traps:  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 120 (only for hardware 0.3.0.11 and up)  d) ibsTrapCpuFanOK (only for hardware 0.3.0.00 and up)  8) Log size enable/disable following traps:  a) ibs TrapLogSize  9) Update  a) ibs TrapUpdate  b) ibs TrapUpdateReboot      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 121: Log File Page

    Reset the log file – erase the content of the log    8.8.1.2 Remote log  Set the remote log ON/OFF (default: OFF)    8.8.1.3 Remote log Server IP  Set the Remote log server IP address (default IP: 192.168.0.6)        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 122: Hb Packet Page

    EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  8.9 HB Packet page       This page enables the user to change or to load new Heartbeat packet content.      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 123: Rescue Page

      USER GUIDE   EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  8.10 Rescue page     Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 124: Device Firmware Update Area

    The following screen appears during the IBS reboot progress, when the IBS will load  again the main screen will appear.    8.10.2.5 Power off (only for hardware 0.3.0.11 and up)  Module power will be off after select check box “Power off” and click “Apply” button.  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 125: Technical Support Area

    EdgeSafe 10G Modular Bypass | ​ F irmware Rev Level: 0.3.3.2  8.10.3 ​ T echnical support area  The command gathers all the necessary information needed for the Technical Support team  in order to help resolve technical problems.      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 126: Management Push Button Interface

    Use a short press on the PB0 button in order to move to the next query.  Use a short press on the PB1 button to select the query and to display the next data item on  the query.      Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 127: Infomnf Menu

    Use a short press on the PB0 button in order to move to the next query.  Use a short press on the PB1 button to select the query and to display the next data item on  the query.        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 128: Appendixes

    IBS10G-LR - Supports Long Range Fiber 10 Gigabit Ethernet (Base-LR).  IBSG-SX - Supports Short Range Fiber Gigabit Ethernet (1000Base-SX).  IBSG-LX - Supports Long Range Fiber Gigabit Ethernet (1000Base-LX).  IBSG-ZX - Supports Long Range Fiber Gigabit Ethernet (1000Base-ZX).        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 129: Bypass Specifications

    > 150,000 hour  MTBF*:  10.4.1.2 IBS1U/IBS1UP: Bypass Switch 1U Host System LEDs / Connector Specifications    (2) Power LED – Green, Power is on, LED per power supply  LEDs:    Connectors:    Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 130: Ibs10G-Sr / Ibs10G-Sr

    Off: WDT is disabled  Bypass - Red when bypass, off on Normal  Alarm – Red on system alarm  Network: 2 LC Duplex  Connectors:  Monitor: 2 SFP+  Management: RJ-11 serial port, RJ-45 1G copper  Ethernet  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 131: Ibs10G-Lr / Ibs10Gp-Lr

    Bypass - Red when bypass, off on Normal  Alarm – Red on system alarm  Network: 2 LC Duplex  Connectors:  Monitor: 2 SFP+  Management: RJ-11 serial port, RJ-45 1G copper  Ethernet          Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 132: Ibsg -Sx / Ibsgp-Sx

    Bypass - Red when bypass, off on Normal  Alarm – Red on system alarm  Network: 2 LC Duplex  Connectors:  Monitor: 2 SFP    Management  RJ-11 serial port  RJ-45 Ethernet // optional for future use  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 133: Ibsg-Lx / Ibsgp-Lx

    Bypass - Red when bypass, off on Normal Alarm –  Red on system alarm  Network: 2 LC Duplex Monitor: 2 SFP  Connectors:  Management:  RJ-11 serial port  RJ-45 Ethernet // optional for future use  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 134: Appendix D: Order Information

    (with power  supply trap  capabilities)  ER: 10G  Extended  Reach            EX: 1G  Extended  Reach            T- Copper  1000BASE-T  100BASE-T  10BASE-T          Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 135 Single mode, 1U host, US cable. (with power                 Bypass Switch  supply trap capabilities)  IBS10G1UP-1LR-CN  1U w/ 10 Gigabit Fiber (LR)) Intelligent  Single mode, 1U host, CN cable  Bypass Switch  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 136 , 1U host, EU cable  IBS10G1UP-1LR-1SR  1U w/ Two 10 Gigabit Intelligent Bypass  1 x Single mode, 1x Multimode, 1U host, EU  Switch. One (LR) and  cable  one (SR)        Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 137: Safety Precautions

    10.7 TFTP server installation and configuration.  10.7.1 Windows TFTP server installation and configuration  Use any TFTP server utility to create TFTP server (for example: tftpd32 which is a free utility):  1) Create \tftp directory  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...

  • Page 138: Linux Tftp Server Installation And Configuration

    = no  socket_type = dgram  protocol = udp  wait = yes  user = root  server = /usr/sbin/in.tftpd  server_args = /tftpboot  }    9) Restart the tftp servers on your host: /etc/init.d/xinetd restart  Garland Technology | 716.242.8500 | ​ g arlandtechnology.com/support...
  • Page 139                   the date of publication, is subject to change without notice. Garland Technology assumes no responsibility for any errors or omissions in this                  ...

This manual is also suitable for:

Edgesafe m10gssbpv2Edgesafe m10gesbpv2Edgesafe m10g1acv2Edgesafe m10g1dcv2

Table of Contents