Egress; Config Map Save - Garland P10GMSFE-5 User Manual

2. Filter templates may be modified by selecting the green filter icon for the desired template.
The Edit Filter panel will be displayed. Any option modification made will not change the original
template. It is advisable to rename a filter if the original filter template options were modified.
3. Enter the filter name, optional. If no name is entered the system will automatically apply a name to the
filter as follows, iFlt, iFlt(2), iFlt(3) etc.
4. Select Accept once all desired options have been modified.
5. Remove a Filter Template by selecting the Red X.

Egress

1. Add an egress port(s) 3 and/or 4 by placing the cursor on the desired port. Select with the left mouse
button. Drag the port to the Egress panel and release. Ports may be added in any combination. If
ports 3 and 4 are added, then 100% of the traffic will be sent to each port.
Figure 17 Egress Port(s)
2. Remove a port by selecting the Red X.

Config Map Save

1. Select Save to save the current configuration.
The "Save this configuration? (May take a few seconds.)" panel will be displayed.
2. Select OK to save the Config Map.
3. Select Cancel to disregard.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2023 Garland Technology, LLC. All rights reserved.
User Guide
XtraTAP | P10GxxFE-X | 4.22.1
41