Garland INT10G12MSBP User Manual

Garland INT10G12MSBP User Manual

Hide thumbs Also See for INT10G12MSBP:

Advertisement

Quick Links

User Guide
INT10G12MSBP / INT10G12SSBP
12/2022
Release Version: 4.22.1
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INT10G12MSBP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Garland INT10G12MSBP

  • Page 1 User Guide INT10G12MSBP / INT10G12SSBP 12/2022 Release Version: 4.22.1...
  • Page 2 The Garland Technology trademarks, service marks ("Marks") and other Garland Technology trademarks are the property of Garland Technology, LLC. PacketMAX Series products of marks are trademarks or registered trademarks of Garland Technology, LLC. You are not permitted to use these Marks without the prior written consent of Garland Technology.
  • Page 3: Table Of Contents

    TACACS Primary Authentication TACACS Test TACACS Ping Test TACACS Secondary Authentication TACACS Test TACACS Ping Test Network Settings IPv4 / Disable IPv4 Enable IPv6 Enable Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 4 Configure ATLB2 Chained Tap Mode Remove Entity Add Entity Remove Entity Inline Appliance Member Add Entity Inline Appliance Member Taps Settings ATLB2 Chained Tap Mode GUI Indications Normal Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 5: Dashboard

    (GREEN). However, on the faceplate, the Ethernet Interface has LEDs to indicate link and activity while there are no Serial Interface LEDs. Dashboard Panel LED Indications Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 6: Packet Broker

    Port 12 Left Down Arrow Link LED * The right up/down arrows for ports 3 through 12 are activity LEDs. These LEDs are N/A in the GUI. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 7: Default Tap Mode

    * The right up/down arrows for ports 5 through 12 are activity LEDs. These LEDs are N/A in the GUI. * The L/A1 and L/A2 LEDs only indicate link in the GUI. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 8: Primary-Secondary Tap Mode

    X are activity LEDs. These LEDs are N/A in the GUI. * The L/A1 and L/A2 LEDs only indicate link in the GUI. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 9: Load Balance Tap Mode

    Tap 1 Additional Inline Appliance 2 through 4 Link LED Port X Odd Left Down Arrow Tap 1 Additional Inline Appliance 2 through 4 Link LED Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 10: Atlb2 Chained Tap Mode

    Entity B Inline Appliance Link LED Port 6 Left Down Arrow Entity B Inline Appliance Link LED Port 7 Left Up Arrow Entity C Inline Appliance Link LED Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 11: System

    System Info SNMP General Export Configuration Admin Import Configuration Network Settings Software Upgrade Date & Time Reboot Syslog 1. Select System on the Dashboard Menu bar. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 12: System Info

    6. Select Cancel to return to the General System Settings panel. Admin The following configuration options may be displayed, modified, enabled or disabled. Users Groups Authentication Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 13: Users

    2. Enter the Group Name. 3. Select the desired privileges. 4. Select Save to save updates. The new group will be displayed on the Admin Settings panel. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 14: Authentication

    This option may be used to verify the authentication of a TACACS user, password and authorization group. The TACACS Test option will be active only if TACACS authentication has previously been enabled. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 15: Tacacs Ping Test

    1. Select TACACS Test. The TACACS Test panel will appear. 2. Select Secondary. 3. Enter the Username. 4. Enter the Password. 5. Select Test. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 16: Tacacs Ping Test

    1. Select Network Settings. The Network Settings panel will be displayed with the current configuration. IPv4 / Disable 1. Deselect Enable IPv4. 2. Select Save. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 17: Ipv6 Enable

    The Select Certificate and Select Key File panel will appear. 2. Select Choose File for Select Certificate. 3. Select the desired cert.pem file. 4. Select Open. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 18: Disable Using Uploaded Ssl Certificate

    The Date & Time Settings panel will be displayed. Timezone 1. Select Edit Settings. 2. Select the desired Timezone using the pull down panel. 3. Select Save. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 19: Manually Set Date & Time

    If IPv6 is desired, then an IPv6 management interface must be assigned. The system allows for an IPv4 and IPv6 management interface to be assigned simultaneously. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 20: Syslog

    9. Select Cancel to return the Syslog Configuration panel. Syslog Test 1. Select Syslog Test. The GUI message will be displayed,”Syslog Test Successful!”. 2. Verify the Syslog Test Message on the Syslog server. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 21: Snmp

    14. Select Cancel to return the SNMP Configuration panel. SNMP Test 1. Select SNMP Test. The GUI message will be displayed,”Test Successful!”. 2. Verify the SNMP Test Message on the MIB Browser. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 22: Export Configuration

    This option allows the unit to be rebooted. The traffic will be affected for up to 1 minute. 1. Select Reboot. The Reboot Device panel will be displayed. 2. Select Reboot. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 23: Bypass Taps

    The following mode options may be displayed, modified, enabled or disabled under the Bypass Taps panel. Default Tap Mode ATLB2 Chained Tap Mode Primary-Secondary Tap Mode Load Balance Tap Mode Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 24: Default Tap Mode

    Heartbeat packets are transmitted bidirectionally from the inline appliance ports on the tap through the inline appliance or tool to monitor the health of the device. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 25: Bypass Tap Name

    4. Select the Check to save updates. 5. Select Cancel to return the Bypass Taps panel. Heartbeat Settings The following configuration options may be displayed or modified. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 26: Taps Settings

    When the issue with the inline appliance port(s) is resolved, link and heartbeats restored, the tap will automatically switch back to inline. Figure 2 Default Tap Mode (Inline) Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 27 If selected, the tap bypass option is disabled. If an issue occurs with the inline appliance port(s), loss of link or heartbeats, the traffic will go down. Figure 5 Default Tap Mode (Force Inline) Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 28 7. Select Accept to save updates. Save must additionally be selected on the Bypass Taps panel. 8. Select Cancel to return the Bypass Taps panel. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 29 Additional monitor ports may be added using the same procedure. 2. Select Save to save updates. 3. Select Cancel to return the Bypass Taps panel. Figure 8 Default Tap Mode (Monitor Port) Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 30: Primary-Secondary Tap Mode

    Tap 1 Port 1 (Network) Port 2 (Network) Port 3 (Primary) Port 4 (Primary) Port 5 (Secondary) Port 6 (Secondary) Figure 9 Primary-Secondary Tap Mode Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 31: Bypass Tap Name

    4. Place the cursor on the Inline Appliance option. Select with the left mouse button. Drag the Inline Appliance option to the blue box and release. 5. Select the red X to remove. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 32: Taps Settings

    Revertive. If revertive is enabled, then the system will switch from bypass to the primary inline appliance if it is recovered first. Figure 10 Primary-Secondary Tap Mode (Primary Inline) Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 33 Typically used during maintenance activities. Figure 13 Primary-Secondary Tap Mode (Force Bypass) Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 34 If the primary inline appliance restores first, has link and heartbeats, a Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 35: Switch To Primary

    Additional monitor ports may be added using the same procedure. 2. Select Save to save updates. 3. Select Cancel to return the Bypass Taps panel. Figure 16 Primary-Secondary Tap Mode (Monitor Port) Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 36: Load Balance Tap Mode

    Port 6 (Inline Appliance) Port 7 (Inline Appliance) Port 8 (Inline Appliance) Port 9 (Inline Appliance) Port 10 (Inline Appliance) Figure 17 Load Balance Tap Mode Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 37: Bypass Tap Name

    2. Place the cursor on the Load Balance Mode Select option. Select with the left mouse button. Drag the Load Balance option to the blue box and release. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 38 1-4. When the issue with the inline appliance port(s) is resolved, have link and heartbeats, the tap will automatically switch back to inline. Figure 18 Load Balance Tap Mode (Inline) Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 39 Typically used during maintenance activities. Figure 20 Load Balance Tap Mode (Force Bypass) 4. Select the Fail Mode. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 40 8. Select Accept to save updates. Save must additionally be selected on the Bypass Taps panel. 9. Select Cancel to return the Bypass Taps panel. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 41: Atlb2 Chained Tap Mode

    IPSs or tools to monitor the health of the devices. Tap 1 Port 1 (Network) Port 2 (Network) Entity A Entity B Entity C Entity D Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 42: Configure Atlb2 Chained Tap Mode

    A “Packetbroker data will be cleared. Go to ATLB2 Mode?” message will be displayed. 4. Select OK. The ATLB2 Chained tap mode will be displayed. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 43: Remove Entity

    - Ports 7-8 Entity C Inline Appliance Ports - Ports 9-10 Entity D Inline Appliance Ports Basic 3 Entity Configuration - Ports 1-2 Network Ports Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 44 Entity B Inline Appliance Ports Basic 1 Entity Configuration - Ports 1-2 Network Ports - Ports 3-4 / 5-6 / 7-8 / 9-10 Entity A Inline Appliance Ports Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 45: Add Entity

    This is the number of heartbeats that must be lost on any inline appliance port member before any entity will remove the inline appliance from the load balance group. 3. Enter the Heartbeats per Second. Default is 10. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 46 1-2 with no regard for the entity inline appliance port(s), link or heartbeats. Typically used during maintenance activities. Figure 26 ATLB2 Chained Tap Mode (Force Bypass) Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 47 The bypass threshold determines how many inline appliance port members may fail, loss of link or loss of heartbeats, before entity B switches to bypass. Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 48: Atlb2 Chained Tap Mode Gui Indications

    Port 1 – Entity A – Entity B – Entity C – Entity D – Port 2 Port 2 – Entity D – Entity C – Entity B – Entity A – Port 1 Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 49 Port 1 – Entity A – Entity C – Entity D – Port 2 Port 2 – Entity D – Entity C – Entity A – Port 1 Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 50 Port 1 – Entity A – Entity C – Entity D – Port 2 Port 2 – Entity D – Entity C – Entity A – Port 1 Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 51 Port 1 – Entity A – Entity B – Entity C – Port 2 Port 2 – Entity C – Entity B – Entity A – Port 1 Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 52 5. Entity D’s inline appliance members are normal, have link and heartbeats. 6. The traffic per this display indicates: Port 1 – Port 2 Port 2 – Port 1 Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.
  • Page 53 Entity D is bypassed. Entity D’s bypass threshold is 1. 6. The traffic per this display indicates: Port 1 – Port 2 Port 2 – Port 1 Garland Technology | 716.242.8500 | www.garlandtechnology.com Copyright © 2022 Garland Technology, LLC. All rights reserved.

This manual is also suitable for:

Int10g12ssbp

Table of Contents