Enable/Disable Config Map; Disable Config Map; Enable Config Map - Garland P10GMSFE-5 User Manual

3. Select Set to accept the priority value.
4. Select Cancel to disregard.
5. Select Save to save updates.

Enable/Disable Config Map

Config maps may be enabled or disabled as desired. If a config map is enabled, it is in the database and
available for traffic. If a config map is disabled, it is in the database and not available for traffic. If the
config map has a green check, then it is enabled. If the config map has a red dash, then it is disabled.

Disable Config Map

1. Select the green check for the config map in the Enable column.
The green check will change to a red dash.
2. Select Save.

Enable Config Map

1. Select the red dash for the config map in the Enable column.
The red dash will change to a green check.
2. Select Save.
The red dash will change to a green check.
3. Select Save.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2023 Garland Technology, LLC. All rights reserved.
User Guide
XtraTAP | P10GxxFE-X | 4.22.1
34