Table of Contents
Advertisement
Export Configuration
This option creates a configuration file (exportCfg.json) that may be used to recover a unit. The
exportCfg.json file may be renamed if desired. The exportCfg.json file does not contain Usernames,
Passwords, Groups or Network Settings.
1. Select Export Configuration.
The Export Configuration panel will be displayed.
2. Select Export.
The exportCfg.json file will be downloaded to the default download destination of the browser.
Import Configuration
This option allows a previously created configuration file (exportCfg.json) to be uploaded to the unit. The
Chassis Model is the only option that is considered and must match, otherwise the unit will reject the
exportCfg.json file.
1. Select Import Configuration.
The Import Configuration panel will be displayed.
2. Select Choose File.
3. Select the desired exportCfg.json file.
4. Select Open.
5. Select Upload.
The unit will automatically verify the selected exportCfg.json file.
6. Select Configure.
The unit will import and load the exportCfg.json. An "import done" message will be displayed
when complete. A reboot is not required.
Software Upgrade
This option allows the unit's firmware to be upgraded. An Upgrade Guide is created as part of the
standard documentation for each release. Please refer to the Upgrade Guide for the procedure.
Reboot
This option allows the unit to be rebooted. The traffic will be affected for up to 1 minute.
1. Select Reboot.
The Reboot Device panel will be displayed.
2. Select Reboot.
The unit will present an "Are you sure?" message.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2023 Garland Technology, LLC. All rights reserved.
User Guide
XtraTAP | P10GxxFE-X | 4.22.1
22
Advertisement
Table of Contents
