Table of Contents
Advertisement
Figure 2 Breakout Mode
Figure 3 Breakout Mode (LFP)
If link is lost on one of the network ports. The TX will be disabled on the other network
port. The RX for both network ports remain on.
5. Filter Mode
In this mode, the unit functions as a 4 port packet broker. The traffic that is passed between the ports
is determined by the config map(s) and filter(s) created. Config maps may be created between all four
ports as desired.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2023 Garland Technology, LLC. All rights reserved.
User Guide
XtraTAP | P10GxxFE-X | 4.22.1
25
Advertisement
Table of Contents
