Filter - Garland P10GMSFE-5 User Manual

8. Select the Check to apply updates.
Ingress
1. Add an ingress port(s) 1 and/or 2 by placing the cursor on the desired port. Select with the left mouse
button. Drag the port to the Ingress panel and release. Ports may be added in any combination. If
ports 1 and 2 are added, then the traffic from the ports will be aggregated.
Figure 14 Ingress
2. Remove a port by selecting the Red X.

Filter

1. Add filters by placing the cursor on the desired filter template. A previously created filter
template or the new filter template option may be selected. Select with the left mouse button. Drag the
filter template to the Filter panel and release. The filter template will become an actual filter once
the config map is saved. Filters may be added in any combination. If multiple filters are added, then the
top filter is the highest priority. The filters are considered from top to bottom. A filter may be selected
and moved up or down depending on priority preference.
Figure 15 Filter
Figure 16 Filter System Considerations
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2023 Garland Technology, LLC. All rights reserved.
User Guide
XtraTAP | P10GxxFE-X | 4.22.1
40