Maintenance Before A Long Stop Period; Maintenance After A Long Stop Period - Daikin FXHQ63AVEB8 Installer And User Manual

10 | Maintenance and service

10.3 Maintenance before a long stop period

10.4 Maintenance after a long stop period

Installer and user reference guide
30
a
a Clip
3 Remove the air filter. Refer to
4 Clean the suction grille. Wash with a soft bristle brush and water or neutral
detergent. If the suction grille is very dirty, use a typical kitchen cleaner, leave
it on for 10 min, then wash it with water.
5 Reattach the air filter. Refer to
6 Reattach the suction grille and close it. (steps 2 and 1 in reverse order).
INFORMATION
When closing the suction grille, make sure the straps of the suction grille are not
pinched anywhere.
E.g., at the end of the season.
▪ Let the indoor units run in fan only operation for about half a day in order to dry
the interior of the units.
▪ Turn off the power. The user interface display disappears. When the main power
is turned on, the air conditioner will use some power, even if it is not operating.
▪ Clean air filters and casings of indoor units (see
air filter and suction grille" [
▪ Remove the batteries from the user interface (if applicable).
E.g., at the beginning of the season.
▪ Check and remove everything that might be blocking inlet and outlet vents of
indoor units and outdoor units.
▪ Check if the earth is connected properly.
▪ Check if there is somewhere a broken wire. Contact your dealer in case of
problems.
▪ Clean air filters and casings of indoor units (see
air filter and suction grille" [
▪ Insert batteries in the user interface (if applicable).
▪ Turn on the power at least 6 hours before operating the unit in order to ensure
smoother operation. As soon as the power is turned on, the user interface
display appears.
"10.2.2 To clean the air
"10.2.2 To clean the air
"10.2 Cleaning the unit exterior,
4
28]).
"10.2 Cleaning the unit exterior,
4
28]).
4
filter" [ 28].
4
filter" [ 28].
FXHQ-A
VRV system air conditioner
4P715928-1 – 2022.11