Repackaging For Shipment; Using Original Packaging; Using Other Packaging - Keysight 778D Operating And Service Manual

Repackaging for Shipment

Using original packaging

The same type of containers and materials used in factory packaging can be obtained through
Keysight Technologies.
If the coupler is being returned to Keysight Technologies for servicing, attach a tag indicating the
type of service required, return address, and model number. Also, mark the container FRAGILE to
assure careful handling.
In any correspondence refer to the coupler by full model number.

Using other packaging

The following general instructions should be used when repackaging with commercially available
materials:
1 Wrap the coupler in heavy paper or plastic. (If shipping to a Keysight Technologies office or
service center, attach a tag indicating the type of service required, return address, and model
number.)
2 Use a strong shipping container. A double wall carton made of 2.4 MPa
(350 psi) test material is adequate.
3 Use enough shock-absorbing material (3-4-inch layer) around all sides of the coupler to
provide firm cushion and prevent movement inside the container.
4 Seal the shipping container securely.
5 Mark the shipping container FRAGILE to assure careful handling.
Keysight 778D Operating and Service Manual
Installation and Shipping 3
21