Engine Air Filter - Genie GTH-2306 Operator's Handbook Manual

■
D-3.6

ENGINE AIR FILTER

Clean the engine air filter every 10 hours; replace the
filtering element, if necessary.
1 Cleaning and changing the external element:
- Stop the engine and engage the parking brake.
- Unscrew wingnut A and remove cover B.
- Unscrew wingnut C and remove the outer element
D.
- Clean the filter bowl.
- Dry clean the canister (max. pressure: 6 bar) and
direct the air jet from inside to outside.
- Check for cracks in the filtering element
introducing a lamp inside.
- Smear the seal with grease, then refit the element.
- Tighten wingnut C, close cover B and tighten
with wingnut A.
ATTENTION
When the cab indicator comes on, replace the outer
element immediately.
ATTENTION
The handlers of the agricoltural series are equipped
with centrifugal pre-filter.
Daily check it and remove any collected dust.
To empty the dust bowl, unscrew wing nut G and
remove the dust canister.
Handler with telescopic boom GTH-2306
MAINTENANCE
D-9
Page
Document 57.0002.2200 - 12/2002
SERVICE INTERVAL
Running-in ___________________________ None
Cleaning ___________________ Every
Filtering element substitution _ Every
10
hours
500
hours