Tyres And Wheels; D-3.5 Brakes; D-3.5.1 Checking The Brake Oil Level - Genie GTH-2306 Operator's Handbook Manual

■
D-3.4

TYRES AND WHEELS

DANGER
Over-inflated or overheated tyres can burst. Do not
flame-cut or weld the wheel rims. For any repair
work, call in a qualified technician.
For the tyre inflation or substitution, please refer to the
table below:
Dimensions 12-16.5 EM14
Load index
Rim
Wheel disc
Pressure bar
Psi
On new machines, and when a wheel has been
disassembled or replaced, check the nut torque of the
wheels every 2 hours until they stay correct.
ATTENTION
Always use tyres having the dimensions indicated
in the vehicle registration card.
SERVICE INTERVAL
Running-in _________ Within the first
Ordinary __________________ Every
Handler with telescopic boom GTH-2306
GTH-2306
standard optional
11.5/80-15.3
pr 8 pr 10
9.75x16 9.00x15.3
8 holes DIN 70361
3.5 3.5
50.8 50.8
10
hours
250
hours
Document 57.0002.2200 - 12/2002
MAINTENANCE

D-3.5 BRAKES

• For any intervention on the braking system
(adjustment and/or substitution of the brake discs)
call in a specialised technician.
The malfunctioning of the braking system may depend
on the presence of air within the hydraulic circuit.
To bleed the circuit, proceed as follows:
• Make sure that the oil is level within the feeding
tank .
• Step on the brake pedal repeatedly.
• While stepping on the brake pedal, slowly unscrew
valve
air bubbles comes out.
• Repeat the operation until bubble-free oil comes
out.
• Bleed from both sides of the machine.

D-3.5.1 Checking the brake oil level

The oil within the braking circuit must be at about 2 cm
from the tank plug
D-8
Page
and re-close it as soon as oil mixed with
.
Level