C-3.2 Engine Controls And Instruments; C-3.2.1 Ignition Switch; C-3.2.2 Forward/Reverse Gear Switch - Genie GTH-2306 Operator's Handbook Manual

C-3.2 ENGINE CONTROLS AND
INSTRUMENTS
■ C-3.2.1
Ignition switch
Four-position switch:
No circuit under voltage, key can be removed
and engine is stopped
Thermostarter for cold climates. Turn the key to
this position and hold it for 10÷15 seconds, then
turn it to pos. I to start the engine
Circuits under voltage, presetting for the engine
starting. Board controls and instruments are on.
Engine starting; when released, key springs
back to pos. I automatically.
Handler with telescopic boom GTH-2306
OPERATING INSTRUCTIONS
C-8
Page
Document 57.0002.2200 - 12/2002
■ C-3.2.2
Forward/reverse gear selector switch
Three-position switch with lock in neutral position:
N Neutral position; no gear engaged
F Shift lever to pos. F to select the forward gear
R Shift lever to pos. R to select the reverse gear
80 80
40 120 40
°C
F
N
R
120
°C