Troubleshooting; Specification - Reolink 2205C Quick Start Manual

Troubleshooting

Camera is not Powering on
If your camera is not powering on, please try the following solutions:
For PoE Camera
• Make sure your camera is powered on properly. The PoE camera should
be powered by a PoE switch/injector, a Reolink NVR or a 12V power
adapter.
• If the camera is connected to a PoE device as listed above, connect it to
another PoE port and check again.
• Try again with another Ethernet cable.
For WiFi Camera
• Plug the camera into a different outlet and see if it works.
• Power on the camera with another working 12V 2A DC adapter and see
if it works.
If these won't work, contact Reolink Support.
11 English
Picture is not Clear
If the picture from the camera is not clear, please try the following
solutions:
• Check the camera dome cover for dirt, dust or spiderwebs, please clean
the dome cover with a soft, clean cloth.
• Point the camera to a well-lit area, the lighting condition will affect the
picture quality a lot.
• Upgrade the firmware of your camera to the latest version.
• Restore the camera to factory settings and check out again.

Specification

Hardware Features
Infrared Night Vision: Up to 30 meters(95ft)
Day/Night Mode: Auto switchover
Angle of View: Horizontal: Horizontal: 104°-38° Vertical: 60°-21°
General
Dimension: Φ133x100 mm
Weight: 685g
Operating Temperature: -10°C~+55°C (14°F~131°F)
English 12