Reolink Argus 2 User Manual
  1. Manuals
  2. Brands
  3. Reolink Manuals
  4. Security Camera
  5. Argus 2
  6. User manual

Reolink Argus 2 User Manual

Wireless battery -powered camera
Hide thumbs Also See for Argus 2:
Table of Contents

Advertisement

Quick Links

Sept 2021
QSG1_A
User Manual
Reolink Wireless Battery-powered Camera
CaCameraCamerCaCCamera

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Argus 2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Reolink Argus 2

Summary of Contents for Reolink Argus 2

  • Page 1 Sept 2021 QSG1_A User Manual Reolink Wireless Battery-powered Camera CaCameraCamerCaCCamera...

  • Page 2: Table Of Contents

    Recording and Playback ....................53 Set up Recording ......................53 Playback and Download Recordings ................ 54 Time Lapse .......................... 59 6. Use the Reolink App......................63 Share your devices with others ..................63 Scene Modes ........................65 Add or Delete a Camera ....................67 App Settings ........................

  • Page 3: Camera Introduction

    Reolink Wireless Battery-powered Camera 1. Camera Introduction Device Overview Argus 2/Argus Pro A Rechargeable battery and Wi-Fi connectivity make the camera totally wire-free. No network or power cable, no drilling and no outlets needed. Security is simple. You can put it anywhere you want: on a shelf or a table; at the front door or back door;...
  • Page 4 Reolink Wireless Battery-powered Camera Argus 2E Argus 2E runs on a non-removable high-capacity rechargeable battery. Without power cables, it provides clean, easy and flexible installation. You can put it anywhere you want, indoors or outdoors. Daylight Sensor 6 PCS IR LEDs...
  • Page 5 Reolink Wireless Battery-powered Camera Argus Eco Works cable-free with a rechargeable battery and reliable Wi-Fi connection. Flexible and weatherproof – you can put it anywhere with 5-minute installation!
  • Page 6 Reolink Wireless Battery-powered Camera Status LED Built-in Mic 4 PCS IR LEDs Lens Daylight Sensor Built-in Motion Sensor Reset Hole On/Off Switch Micro SD Card Slot Speaker Antenna Micro USB Port Battery Status LED Argus PT Argus PT can work without any cables thanks to a rechargeable battery and Wi-Fi connection.

  • Page 7: Status Light

    Reolink Wireless Battery-powered Camera Status Light Status Light Camera Status Red light Wi-Fi connection failed Blue light Wi-Fi connection succeeded Blinking Standby status Working status...

  • Page 8: Setup And Install

    Reolink Wireless Battery-powered Camera 2.Setup and Install Set up the Camera What’s in the Box Note: The package content may vary and update with different version and platforms, please take the below information only for a reference. And the actual package content are subject to the latest information on the product selling page.
  • Page 9 Reolink Wireless Battery-powered Camera Argus 2E*1 USB Cable*1 Quick Start Guide*1 Security Bracket*1 Security Bracket*1 Mounting Template*2 Surveillance Sticker*1 Pack of Screws*2 Reset Needle*1 Strap*1 Argus 3/Argus 3 Pro Argus 3/Argus 3 pro*1 Note: Others of Argus 3/Argus 3 pro are the same as those of Argus 2E.
  • Page 10 Reolink Wireless Battery-powered Camera Note: There is no skin and wall mount for Argus Eco, and there is just one mounting template. Except for the above differences, others are the same as Argus 2. Argus PT Argus PT*1 Mounting Template*1...
  • Page 11 The charger is a USB adapter (DC 9/5 Volts, not included in the box) which is commonly used for smartphones. A micro USB cable is included in the box. Here we’ll guide you to charge Reolink Argus 2/Argus Pro by using the following three different methods.

  • Page 12: Set Up The Camera On The App

    Step 1. Power on the camera and wait for it starting up. After hearing a startup sound, you will hear repeated Ding sounds or "Please run Reolink App, add the camera and set it up", which means you can scan the UID and start the setup process.
  • Page 13 Reolink Wireless Battery-powered Camera 2. If you are not sure whether you hear the right sound, you may tap "Demo" to hear the sample sound. If you couldn't hear the repeated Ding sounds, please reset your camera. Step 2. Tap on the icon in the top right corner to start the initial setup.
  • Page 14 Wi-Fi password you entered and double-check the password is correct) and tap Next. Step 6. For Reolink battery-powered cameras, a QR code will be generated and displayed on your phone. Please place the QR code on your phone in front of the...
  • Page 15 Reolink Wireless Battery-powered Camera camera’s lens at a distance of about 20 cm (8 inches) and let the camera scan the QR code. Tick “I have heard the beep sound from the camera” or “I have heard the voice prompt” and tap Next.
  • Page 16 Reolink Wireless Battery-powered Camera Step 8. You may initialize your camera: “Create device password" and "Name your device". Forgetting this password could be troublesome in the future, please remember it for your convenience. Note: For Argus 3 Pro, after the camera is named, you need to select scene: Indoor or...
  • Page 17 Reolink Wireless Battery-powered Camera Step 9. "Initialization finished". Tap Use Now and start to preview now. Once the initially setup is completed, you may choose a good position to mount your camera.

  • Page 18: Install The Camera

    Reolink Wireless Battery-powered Camera Install the Camera Here take model Argus 2/Argus Pro as example to demonstrate the steps. Mount the Camera to the Wall Press the button to Screw the security mo Lock the security mou release the plate from unt plate into the wall.
  • Page 19 1. Please select a position with the maximum sunlight exposure throughout the year for your solar panel. For Reolink Solar Panel, it only needs a few hours of direct sunlight exposure to sufficiently power your camera daily. The amount of energy that the solar panel can generate is affected by weather conditions, seasonal changes, geographic locations, etc.
  • Page 20 Reolink Wireless Battery-powered Camera 2. Mount the bracket with the mounting template and the screws provided in the package. 3. Slot the solar panel into the bracket and make sure that it's secure. 4. Loosen the adjusting control on the bracket and adjust the angle of the solar panel to make it receive direct sunlight exposure, then tighten the adjusting control to fix the solar panel.
  • Page 21 Reolink Wireless Battery-powered Camera 5. Connect the solar panel to a Reolink camera with the micro USB cable. Notes: Make sure that there is no covering on the solar panel. The energy harvesting efficiency drops drastically even when a small portion of the solar panel is shaded by other objects.

  • Page 22: View Your Camera

    Reolink Wireless Battery-powered Camera 3. View Your Camera Live View...
  • Page 23 Reolink Wireless Battery-powered Camera Icon Meaning Settings: Provide access to a camera’s settings such as system information, detection alarm and camera recording. More options of live view: Channel Selection, Day and Night, Immersive. Siren: Trigger audio alarm. Spotlight (only for Argus 3 and Argus...
  • Page 24 Reolink Wireless Battery-powered Camera Day and Night Set the camera’s color mode during different times of the day and night. -Color: The camera will capture color images that usually appear during the day. -Black & White: The camera will capture black-and-white images that usually appear during the night with the IR LEDs on.
  • Page 25 One screen can accommodate up to three cameras. You could slip the screen to preview other cameras. Multiple Views If you have several cameras added in your Reolink App, you can view multiple streams at the same screen on Reolink App.
  • Page 26 Reolink Wireless Battery-powered Camera Full-screen View icon to enter into the full-screen mode. to exit the full screen. Two-Way Audio to enter into the two-way audio page; 2. Tap to talk.
  • Page 27 Reolink Wireless Battery-powered Camera Clip to enter into the clip page; 1. Tap 2. Drag the rectangle to the position you want to see. to enter into the PTZ page; 1. Tap 2. Choose the direction you want the camera to pan and tilt.

  • Page 28: Display Settings

    Reolink Wireless Battery-powered Camera Display Settings Flip , then the image will be turned upside down.
  • Page 29 Reolink Wireless Battery-powered Camera Quality 1. Tap Quality to enter into the Quality page; 2. Tap Clear mode or Fluent mode to enter into the settings page for Clear mode or Fluent mode; 3. Tap Save to save the settings.
  • Page 30 Reolink Wireless Battery-powered Camera Anti-flicker Use this feature if some devices such as TV screens and lights are flickering. -50Hz: Used for Australia and the UK. -60Hz: Used for the USA and Canada. 1. Tap Anti-flicker. 2. Choose a proper setting.
  • Page 31 Reolink Wireless Battery-powered Camera Select Scene Tap Select Scene to enter into the settings page, and it includes Indoor and Outdoor scenes. Note: This setting is just for Argus 3 pro. Brightness Drag the circle in the progress bar to adjust the brightness of the image.
  • Page 32 Reolink Wireless Battery-powered Camera Camera Name You can set the position of the camera name on the screen. Date You can set the position of the date on the screen.
  • Page 33 Reolink Wireless Battery-powered Camera Watermark to disable the watermark to be shown on the screen. Privacy Mask If you don’t want others to view some parts in the image, you can set the privacy mask to protect your privacy. Press and drag to draw a black rectangle (up to 3 rectangles) on the screen to block...

  • Page 34: Lights And Led

    You can turn off the status LED if you don't want others to see it. Note: The status LED option is only available to Reolink battery-powered cameras. And it has two working modes. Standby Mode: The camera is in the power-saving mode; there is no live view or video recording.
  • Page 35 Reolink Wireless Battery-powered Camera Color Meaning Status Blinking: Standby Wi-Fi Connection failed On: Working Blinking: Standby Blue Wi-Fi Connection is successful On: Working Note: The LED light will flash every 20 seconds when the camera is in the standby status.

  • Page 36: Alarm And Detection

    4. Alarm and Detection Set up Motion Detection About PIR Detection Reolink battery-powered Wi-Fi cameras use PIR sensors (passive infrared sensors) to detect motion. The PIR sensor detects changes in the amount of infrared radiation impinging upon it, which varies depending on the temperature and surface characteristics of the objects in front of the sensor.
  • Page 37 Turn on/off PIR On the Devices page of the Reolink App, choose the camera and then directly tap on PIR button to quickly turn on or turn off the PIR motion detection. Set up PIR Motion Detection Sensitivity...
  • Page 38 Reolink Wireless Battery-powered Camera 2. Choose PIR Motion Sensor, and tap to enable PIR Motion Sensor. Tap Sensitivity to adjust the sensitivity of the PIR motion sensor.
  • Page 39 Reolink Wireless Battery-powered Camera Drag the bar to adjust the sensitivity from low, mid to high or adjust the sensitivity from 1 to 100. For cameras with digital PIR sensors there’s also an option to reduce false alarms. Reduce false alarms: If you have received frequently false alarms, please enable reduce false alarms option.

  • Page 40: Set Up Motion Alerts

    Reolink Wireless Battery-powered Camera 2. Tap to enable PIR Motion Sensor. Then tap Schedule to set up the schedule and decide when the PIR motion detection works. Set up Motion Alerts Push Notification When the camera detects a motion, it will send a push notification, which pops up on your mobile phone.
  • Page 41 Reolink Wireless Battery-powered Camera 2. Tap on Push Notifications to enable this function. 3. Set a push Schedule if you need. For camera model Argus 3 Pro, you can also select Person, Vehicle or Others.
  • Page 42 Reolink Wireless Battery-powered Camera 4. Set your phone to allow Reolink App to send push notifications. Go to your phone Settings, find Notifications and among the App list find the Reolink App. Make sure the Reolink App can send notifications.
  • Page 43 Reolink Wireless Battery-powered Camera the camera’s live image. Set up Alarm Email 1. Tap on , then tap Email Alerts and enable this function. 2. Tap Set up Now to enter Email Settings, and enter the Email address and Email password, SMTP server and port. Then tap on Save.
  • Page 44 Reolink Wireless Battery-powered Camera 3. Tap Schedule to set up a schedule when you’d like to receive the email alerts, and tap Save. For Argus 3 Pro, you can also choose the Detection Type: Person, Vehicle or Others. 4. Tap Email Content to choose for the camera to send Email with Text or Picture.
  • Page 45 Reolink Wireless Battery-powered Camera 5. Tap Email Settings, then +Add Email Address to add more recipients of Email alerts, then tap Save. Alarm Siren You can set up the camera siren to make an alert sound when a motion is...
  • Page 46 Reolink Wireless Battery-powered Camera Set up Siren 1. Tap on . Tap on Siren and enable Siren. 2. Tap on Custom Alarm Sound, if you want to use a custom sound. Tap Custom sounds, then tap Change custom sounds to record an up-to-5-second sound.
  • Page 47 Reolink Wireless Battery-powered Camera Tap Start to start recording or tap Stop to stop recording. Tap on Sound Test to test the recorded sound or tap Re-record to record again till you’re satisfied. Then tap Apply to save the changes.
  • Page 48 Reolink Wireless Battery-powered Camera Setup Alarm Spotlight 1. Tap on . Then tap Advanced, then tap Spotlight. 2. Tap Night Mode to set it as Auto, in this way, when a motion is detected during night time, it’ll automatically turn on the spotlights.

  • Page 49: Set Up Motion Recording

    Reolink Wireless Battery-powered Camera Set up Motion Recording When the camera detects a motion, it can record and save motion recordings to SD card automatically. You need to install a SD card to the camera, refer to the part of Install the Micro SD card in Chapter 7 about choose the correct SD card and learn how to insert the SD card.
  • Page 50 Reolink Wireless Battery-powered Camera 3. Tap Post-Motion Record Duration to set up the motion recording length, you can choose 8 sec, 15 sec or 30 sec.

  • Page 51: Improve Your Motion Detection

    Reolink Wireless Battery-powered Camera Improve Your Motion Detection Reolink battery-powered cameras have a PIR sensor on each side of the camera and the camera detects the temperature differences between two sides to detect motions. So it’s more sensitive when a person or car is passing in front of the camera from side to side, compared to coming towards to the camera.
  • Page 52 Reolink Wireless Battery-powered Camera PIR motion sensor will be less sensitive to the movement. Tips for Reducing False Alarms Do not install the camera facing bright lights, including sunshine, bright lamp lights, etc. Do not place the camera too close to a place where many vehicles move frequently;...

  • Page 53: Recording And Playback

    5. Recording and Playback Set up Recording Reolink battery-powered cameras only support motion recordings but not continuous recordings. And recordings can be saved into micro SD cards. For details of the setup steps, please refer to the part of Set up Motion Recording in Chapter 4.

  • Page 54: Playback And Download Recordings

    Reolink Wireless Battery-powered Camera 2. Tap on Advanced and then find Record Audio, tap to enable record audio option. Then the camera will record audio in video recordings. Playback and Download Recordings Playback Recording...
  • Page 55 Reolink Wireless Battery-powered Camera 1. Open live view of the camera. Then tap on Playback on the bottom. 2. Select a date to search the recordings. Slide through the timeline to find the recordings you want to replay, tap on the selected recording and it’ll automatically starts to play.
  • Page 56 Reolink Wireless Battery-powered Camera 4. Tap show alarm icon on the bottom to show the alarm recordings only. This is only applicable for the Argus 3 Pro camera, and you can select motion recording type of Person,Vehicle or Others to replay.
  • Page 57 Reolink Wireless Battery-powered Camera Download Recordings 1. Open live view of the camera. Tap on Playback on the bottom. 2. Select a date to search the recordings. Slide through the timeline to find the recordings you want to replay, tap on the selected recording and then tap on the...
  • Page 58 3. Drag on the timeline to cut the recordings up to 120 seconds, then tap on Download to download the recording to your phone. Delete Recordings Reolink cameras don’t support deleting selected recordings. The camera will automatically delete and overwrite the older recordings when the SD card is full. Or...

  • Page 59: Time Lapse

    Reolink Wireless Battery-powered Camera you can manually format the SD card to delete all recordings. Time Lapse Time-lapse photography, also known as time-lapse video, is a shooting technique that compresses time. It shoots a group of photos or videos, by connecting photo series or extracting video frames, the process of several minutes, hours, or even several years is compressed into a short period of time and played as a video.
  • Page 60 Reolink Wireless Battery-powered Camera 3. Select a scene from the list or tap on Customize to create a customized time lapse capture. 4. Customize the settings of Capture Starts time, Duration, Interval, Quality and File Type, then tap on Start. The camera will automatically start to capture at the...
  • Page 61 Reolink Wireless Battery-powered Camera 5. Later when the time lapse video is created, you can tap on View on the Time Lapse page to play back or download it. It usually takes several seconds or minutes for the time lapse video to cache before playback starts. You can also tap on the trash icon to manually delete the time lapse video.
  • Page 62 Reolink Wireless Battery-powered Camera 6. Tap on Settings icon, here you can turn on or off the option Overwrite Time Lapse Files. 7. Tap on the pictures icon to view the Time Lapse Gallery. Here you can view or manage all time lapse videos.

  • Page 63: Use The Reolink App

    Share your devices with others 1.Launch Reolink App on your phone, then tap to enter the Device Settings page. .Tap Share Camera to get the camera’s QR code. 2.Launch the Reolink App in another smart phone and tap button to scan the QR code.
  • Page 64 Reolink Wireless Battery-powered Camera Or you can manually input the camera’s UID to add the device. The camera UID consists of 16 digits that start with 9527000xxxxxxxxx. After entering the UID, please tap Next to enter the camera password to log in.

  • Page 65: Scene Modes

    Reolink Wireless Battery-powered Camera Scene Modes The Scene Modes settings is designed for different usage scenarios. You could control all your cameras under different modes as you need. For instance, you could disable all cameras alarm under home mode when you're home, but enable all the alarms under outside mode when you are away.
  • Page 66 Reolink Wireless Battery-powered Camera 3.Select devices for this scene and customize the alarm settings. If you want to receive push,email,audio alarm under this scene mode that you can enable the alarm settings with push, email, audio, alarm,Blue icon means enable, Grey means disable.

  • Page 67: Add Or Delete A Camera

    If you want to add the camera in LAN, we recommend that you enable the Add Devices Automatically option. , once your smart phone and camera are connected the same network, the Reolink App can find the Reolink device automatically in LAN. 2. Tap and go to Settings >Add Devices Automatically...
  • Page 68 Reolink Wireless Battery-powered Camera 3. Enter the camera password to log in.
  • Page 69 Reolink Wireless Battery-powered Camera Add the camera by scan the QR code 1.Tap and scan the QR code on the camera body. 2.Enter the camera password to log in. Add the camera by entering the UID 1.Select Input UID/ IP, please note that you are unable to add the battery powered...
  • Page 70 Reolink Wireless Battery-powered Camera Note: The camera UID consists of 16 digits that start with 9527000xxxxxxx. 2.Enter the camera UID,tap Next to log in with the camera password.

  • Page 71: App Settings

    Reolink Wireless Battery-powered Camera Delete a camera from Reolink App then scroll down the page to delete the device. App Settings Launch the Reolink App. Tap and you can adjust the device order, change sound settings, App password, clean cache, etc.
  • Page 72 Reolink Wireless Battery-powered Camera ·Adjust Device Order: Adjust order for a quicker access to the devices you want, tap and drag the device to the position as you want. ·Message Sound Settings:Like the push notification sounds, tap and you can choose the notification sound you like.

  • Page 73: Camera Settings

    ·Clear Cache:Clean the Reolink App cache, Cache is the temporary data generated When you use the app. Clearing cache will not affect the normal use of Reolink App. ·Auto live view:While you launch the Reolink App, the app will start the live stream automatically.
  • Page 74 Reolink Wireless Battery-powered Camera Check the network information 1. Launch the Reolink App and tap on Device Settings, then tap camera name go to Device Info. 2. Tap Network Info and you will see the camera’s IP address, default gateway and...
  • Page 75 Reolink Wireless Battery-powered Camera Change Wi-Fi connection of the camera 1.Tap on camera Device Settings, then tap Network menu. 2.Choose the available Wi-Fi you want the camera to connect to, and input the Wi-Fi password. Then tap Save to connect. It’ll take a minute for the camera to...

  • Page 76: Sd Card Storage

    Please choose a SD card with below specification so it can be compatible with the camera. Item Requirement Up to 128GB (Argus 2; Argus 2E; Argus 3; Argus Capacity Pro; Argus Eco; Argus PT; Reolink Go PT with the latest firmware version) Read and Write Speed Class 10 or higher/ ≥26Mbps...
  • Page 77 Reolink Wireless Battery-powered Camera 2.Insert the micro SD card into the micro SD card slot on the right side of the camera. Note: Please use your fingernail (or use the provided reset needle) to push the SD card in until you feel that it's locked or you hear a "Tap".
  • Page 78 For other models, the steps to install or remove the SD card are similar. Please refer to the part of Device Overview in Chapter 1 to find the SD card slot. Check the micro SD card status 1. Launch the Reolink App and tap Settings , then tap the camera to enter Device Info page.

  • Page 79: Device Information

    Reolink Wireless Battery-powered Camera 2. Tap Storage, and you can see the SD card used space/total storage space.Tap Format to format the SD card. Device Information...

  • Page 80: Battery Information

    Reolink Wireless Battery-powered Camera From device information page, you can check the basic information about your camera include Model No, UID, and firmware version. 1. Launch the Reolink App then tap then go to Device Info. Device name Camera name Model camera model No.
  • Page 81 Reolink Wireless Battery-powered Camera User can check the battery status and level here. 1. Launch the Reolink App and tap > Battery. The camera battery level will be displayed as picture below. low battery level below 15% Allow and Continue: This will allow to count your battery consumption data for...
  • Page 82 Reolink Wireless Battery-powered Camera You can also check the full battery battery level and charging status from Devices page. 15%-30% connected with charger, not charging connect with DC charger and charging connected with solar panel, not charging connected with solar panel and...

  • Page 83: Device Password

    (no password). During setup the camera, it’ll ask for creating a password before you can access the camera. Change Device Password 1. Launch Reolink App and tap Settings > Advanced > Change Device Password. 2. Enter the old password and new password, then tap on Save.

  • Page 84: Date And Time

    Reolink Wireless Battery-powered Camera 3. Tab Save to save the changes Date and Time Sync camera time with your smart phone 1. Launch Reolink App and tap > Advanced> Date and Time.

  • Page 85: Reboot And Restore

    Reboot and Restore Launch the Reolink App and tap > Advanced> Reboot or Restore. Here you can choose to reboot the camera or restore the camera to default.

  • Page 86: Firmware Upgrade

    Smart Homes Google Home Note: Reolink Argus, Reolink Go, Reolink Go PT, and cameras coming with the NVR system cannot work with Google home or Alexa. 1. Launch the Reolink App to tap to log in your Reolink account and go...
  • Page 87 Reolink Wireless Battery-powered Camera 2.Tap Enable to add the device to Google Home in the Smart Home page. Note:only when it turns to disable that means the smart home feature is enabled. 3. Launch the Google Home, sign in your account and then Get Started to create a...
  • Page 88 Reolink Wireless Battery-powered Camera 4.Name your home and tap Next to build a connection between the Chromecast and the Google Home. 5. After the Chromecast found, please check the code shown on your TV and tap Yes to continue. 6. Connect the Wi-Fi network you would like to use with your Chromecast, then...
  • Page 89 Reolink Wireless Battery-powered Camera 7.Now tap the button to enter the account page, and then tap Settings > Assistant > Home Control. 8. Tap the button and search Reolink in the search bar.
  • Page 90 Reolink Wireless Battery-powered Camera 9. Enter your Reolink account and password to log in first,then tap Allow. 10. Assign the room for the camera you enabled in the account via Reolink App.
  • Page 91 [name of Chromecast device].” Amazon Alexa To connect your camera to Alexa, make sure you have 3 devices at hand: a Reolink camera, an Amazon Alexa device(Amazon Echoshow ,Amazon Echo dot) and your mobile phone; and 2 apps on your phone: the Reolink App and Amazon Alexa App.
  • Page 92 Reolink Wireless Battery-powered Camera 2.Tap Enable to add the device to Amazon Alexa in the Smart Home page. Note:only when it turns to disable that means the smart home feature is enabled. 3.Launch the Amazon Alexa APP, sign into your Alexa account and then tap on...
  • Page 93 Reolink Wireless Battery-powered Camera 4. Select Your Smart Home Skills and tap Enable Smart Home Skills. Please tap the Search icon at the top right corner and search Reolink Smart Home. 5. After search and find Reolink Smart Home, tap ENABLE TO USE.
  • Page 94 Reolink Wireless Battery-powered Camera 6.Type in your Reolink account, and then Tap Log in. After logging in successfully, then tap Allow,the App will remind that “Reolink Smart Home has been successfully linked”. Tap Close to go to the next step.

  • Page 95: Battery Instructions Of Battery Usage

    Close to finish the set. 9. Done! Now you've added the Reolink camera to Amazon Alexa successfully. To test your camera, turn on the turn on the Amazon device and say “Alexa, show [name of the camera]"...

  • Page 96: Faq And Troubleshooting

    Argus 2, Reolink Go, Reolink Go plus is able to remove) 2.Charge the rechargeable battery with a standard and high-quality DC 5V/9V battery charger or Reolink solar panel. Do not charge the battery with solar panels from any other brands.

  • Page 97: Troubleshootings

    Q10: How long the solar panel power extension cable can connect. A:The cable length of Reolink solar panel is 4 meters. If it is not long enough in your case, you may consider purchasing our solar panel extension cable (4.5 meters/15 feet).
  • Page 98 4. The Reolink App Failed to Scan the QR Code Sticker on the Camera Body When you lost the QR code sticker, the sticker is damaged or the Reolink App simply cannot scan to read the QR code on the camera’s body. Please check the below solutions.
  • Page 99 If you still have a phone or computer that can access the camera, please directly restore the device via the software. After restore, you can create a new password. ·For Reolink App, go to camera Settings>Advanced page, click Restore. ·For Reolink Client, go to camera Settings>System> Maintenance, click Restore.

This manual is also suitable for:

Argus proArgus 2eArgus 3Argus 3 proArgus ecoArgus pt

Table of Contents

Save PDF