Reolink Argus 2E Manual
Hide thumbs
Also See for Argus 2E:
- User manual ,
- Operational instruction (42 pages) ,
- Quick start manual (11 pages)
Advertisement
Quick Links
Argus 2E
Argus 2E runs on a non-removable high-capacity rechargeable battery. Without
power cables, it provides clean, easy and flexible installation. You can put it
anywhere you want, indoors or outdoors.
1. Specs
1
Daylight Sensor
2
6 IR LEDs
3
Lens
4
Status LED
5
Built-in PIR Motion Sensor
6
Built-in Mic
7
Outdoor Security Mount
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Reolink Argus 2E
Summary of Contents for Reolink Argus 2E
- Page 1 Argus 2E Argus 2E runs on a non-removable high-capacity rechargeable battery. Without power cables, it provides clean, easy and flexible installation. You can put it anywhere you want, indoors or outdoors. 1. Specs Daylight Sensor 6 IR LEDs Lens Status LED...
-
Page 2: Status Light
Note: The package content may vary and update with different version and platforms, please take the below information only for a reference. And the actual package content are subject to the latest information on the product selling page. Argus 2E... - Page 3 Argus 2 and Argus Pro. After a startup sound, you will hear a repeated Ding sound or a voice prompt. Note: The voice prompt you will hear may be "Welcome to Reolink, please install Reolink app and scan the QR code on the camera" in multilingual versions, or "please run Reolink app, add the camera and set it up".
- Page 4 Step 3. Scan the QR code on the back of the camera. You may tap Light to enable a flashlight when setting up the camera in a dark environment. If the phone doesn't respond, please tap Input UID/IP and then manually type in the UID (16-digit characters under the QR code of the camera).
- Page 5 Step 5. Enter the WiFi password of the selected WiFi network (you may tap the right eye icon to see and double-check the password) and tap Next. Note: Argus 2E only supports the WiFi frequency of 2.4GHz. Step 6. Tap Scan Now. Place the QR code on your phone in front of the camera’s lens at a distance of about 20 cm (8 inches) and let the camera scan the QR code.
- Page 6 Step 7. Wait around 60 seconds for the camera to connect to the router. After hearing "connection to the router succeeded", tick correspondingly and tap Next. Step 8. Create a login password and then name your camera.
- Page 7 Step 9. Read the note below and then tap Finish to complete the initialization of your camera. Once the initial setup is completed, you may choose a good position to mount your camera.
-
Page 8: Install The Camera
Install the Camera We offer you guides on three different scenes in which the camera could be installed. Check out them respectively. Mount the Camera to the Wall Step 1. Rotate to separate the base from the security mount. Step 2. Drill holes with the mounting template and screw the base of the mount onto the wall. - Page 9 Step 5. Secure the camera by turning the part on the mount identified in the chart clockwise. Note: To adjust the camera angle later, please loosen the mount by turning the upper part counterclockwise. Install the Camera with Loop Strap If you'd like to install the camera to a tree stem, follow up on the mounting method below.
- Page 10 Place the Camera on a Surface If you plan to place the camera on a level surface indoors, for example, on the bookshelf, you could put the camera into the stand bracket and adjust the camera angle by slightly rotating the camera back and forth.
Need help?
Do you have a question about the Argus 2E and is the answer not in the manual?
Questions and answers