Machine Startup Instructions - Newco CX TOUCH Manual

MACHINE STARTUP INSTRUCTIONS

1. Fill and install 2lb hoppers with nozzles turned up, Chocolate on left, and Milk on right.
Make sure tab on bottom of hopper is seated in slot in sheet metal. Slight manual
rotation of the auger gear may be necessary to seat hopper in correct location.
2. Rotate dispense nozzles down into whipper bowl.
3. Ensure that there is a proper water supply connected to the machine and water is
turned on. Ensure that the machine is plugged into a proper power outlet and there is
power supplied to the machine.
4. Turn machine power switch on. Machine will start filling.
The Touch Screen Display will indicate when the machine is filling.
Heater will turn on when water in tank is at probe level. The screen will
display "Heating: Please Wait". The heating process can take 10-15
minutes before the machine is ready to brew.
When the hot water tank reaches brewing temperature, display will
change to the Drink Instruction Screen. The machine is now ready for
operation.
Touching the screen will bring up the Drinks Menu Selection Screen.
Place an empty cup in the brewing area, open the powdered hopper
door, and press the "Rinse" button next to the whipper bowl until the water
runs clear.
MANUAL PN 782389 REV 20230126MMF
Technical Service: 1-800-556-3926
12