Pod Brew Mechanism Removal - Newco CX TOUCH Manual

MANUAL PN 782389 REV 20230126MMF

POD BREW MECHANISM REMOVAL

Remove top cover, see page 30 for access points.
CAUTION:
Disconnect power and water from brewer before servicing.
Front View of underside of dispense area.
Remove two outermost knurled brass
nuts (PN 700021), and set aside until
reassembly.
Front View – Top Cover Off
Unsnap water fitting by pushing down on
red tab then pulling elbow out.
Unsnap wiring harness.
Remove drain tube from bracket and move
drain tube out of the way.
Gently lift brew mechanism up and out of
machine.
31
Technical Service: 1-800-556-3926