Newco CX TOUCH Manual page 14

MANUAL PN 782389 REV 20230126MMF
MAINTENANCE
Remaining gallons on the filter will only show up if you set your filter
size in Programming Setup. This is a countdown to show the number
of gallons left before you need to change the water filter.
Reset the Water Filter countdown after changing filters.
The Whipper Seal needs to be changed after 5000 specialty drink
cycles.
Reset the Whipper Seal countdown after changing the Whipper
Seal.
Exit will take you to the Programming Menu.
STATISTICS
This screen shows the various statistics the CX Touch can track.
Please note that Total Water Usage is not resettable.
Please also note that Chocolate and Milk grams remaining will only
be recorded if Powder Tracking is enabled in the Setup menu,
located in the main Programming Menu.
Exit will take you to the main Programming Menu.
14
Technical Service: 1-800-556-3926