User Manual; Introduction; Overview - Dantherm HCH 5 MKII Manual

USER MANUAL

Introduction: Overview

Overview

Target group
This part of the manual, entitled the USER MANUAL, is intended for users of the product.
All instructions described in the INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
must be carried out by trained technicians.
For any future inquiries regarding e.g. spare parts we kindly ask you to make a note of the
Serial number
serial numbers of the units here: ______________________
This guide covers HCH5 MKII.
This device is not intended for use by persons (including children) with reduced physical,
Warning
WARNING
sensory or mental capabilities, unless they are under supervision or have been instructed in
the use of the device by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Caution
Apart from replacing air filters and cleaning the system externally, all maintenance must be
carried out by trained personnel. .
The ducting system must not be mounted until the unit is ready to operate. The power must
Warning
WARNING
not be connected until the ducting system has been mounted.
The ventilation unit should not be used to dry newly built houses during construction or
Caution immediately after construction.
The ducts must be dimmed and the units must not be connected until the house is ready for
occupation, which means that the house is clean and dry. This is to prevent any construction
dust and condensed water from depositing in the ducting system and to prevent any sanita-
tion inconveniences from the ventilation units later on.
If above mentioned warnings are disrespected, the warranty of the unit will be annulled and
any kind of maintenance will be done at the customers own expense.
Safety precau- It is important to know the correct operating procedure for the residential ventilation system
tions and all its safety measures. Dantherm accepts no liability with regard to lost business or per-
sonal injury as a result of non-compliance with safety measures.
USER MANUAL

Introduction

7