Dantherm HCH 5 MKII Manual page 20

Handheld remote
control (HRC 3)
Wired remote
control (HCP 11)
Optional control
unit (HAC 2)
VOC, humidity and
CO sensor
2
Filters
20
AUTO
* *
CO 
2
°
RH%  ° °
°
RH% VOC
CO
2
Replacement filters in sets of two standard filters (ISO Coarse 75%) or of one standard filter
plus one ePM1>50% (pollen filter).
Accesory Illustration
G4 filter set
F7 pollen filter set
INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
Adjust the ventilation and keep track of the home's
humidity and temperature using the large LCD
screen on the handheld remote control.
Activate cooling function/bypass. Select the steps
for manual ventilation or relevant weekly programs
or set the controller to automatic control.
The remote control can communicate with an HCH
unit at a distance of up to 30 metres. The remote
Ikoner for manual control can be placed on horizontal surfaces or
hang on the wall.
A wired remote control (HCP 11) without display
can be connected to the unit if the unit's location
makes it difficult to reach the control panel.
The HCP 11 provides the same functionality as the
control panel.
Additional accessories can be connected to the
HCH unit via an accessory controller: HAC2
The unit can be equipped with a VOC (air quality)
or CO sensor. Mounted sensors will continuous-
2
ly monitor the extract air and adjust the airflow
accordingly. This mode of operation is called de-
mand-controlled mode. If an HRC Remote Control
is connected, the level will be shown in the display
using the Level 3 icon.
Demand-controlled operation will result in the
desired ventilation rate with the lowest possible
electricity consumption.
Standard filter, delivered in pack-
age with two pcs.
Superfine filters which filters
smaller particles e.g. pollen.
Two piece of F7 is delivered with
one piece of G4.
Product description: Accessories
Description
HCH 5
HCH 8
HCH 5
HCH 8
Item no .
063470
063471
063448
063449