Accessing The Main Pcb - Dantherm HCH 5 MKII Manual

INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
Product description: Accessing the main PCB

Accessing the main PCB

Introduction Depending on the installation site and your preferences, you have three options of accessing
the main PCB (see in this section).
Injury caused by electric shock and risk of damage to the device
WARNING
•
Option 1 Tilt the housing
Release the two screws at both sides of the
housing.
Disassemble the complete housing
Option 2
Disassemble the housing from the unit by
releasing the four screws.
Always ensure that the mains plug is disconnected from the electrical outlet before get-
ting access to the main PCB.
Tilt the housing up in order to get access to
the main PCB.
Turn around the housing in order to get
access to the main PCB.
23