Dantherm HCH 5 MKII Manual page 13

USER MANUAL
Maintenance and care: Inspection of the filter
4
5
6
7
Keep the unit clean to ensure perfect operation and good hygiene.
Cleaning
If the unit is soiled, e.g. around filter openings, clean with a firmly wrung dishcloth with tepid
water and detergent.
Terms of warranty
The factory warranty is only valid when preventive maintenance can be proven. Preventive
maintenance must be carried out with a minimum interval of six months.
Documentation of maintenance should be a written log/journal. Regarding which services
needed, see the section "Preventive maintenance" in the installation guide.
Change the filters and discard the old filters in an envi-
ronment-friendly way (flammable material).
Note the arrows on the filters – they must point down!
The filter opening areas are for filters only!
Set back the filter insulating cover plates. It is important that they face the hard, side
outwards and the soft side inward.
Reconnect power supply
When the filters have been replaced, the filter alarm
must be reset by pressing the alarm button for 5 sec-
onds.
A short beep will sound, indicating that the filter alarm
has been reset correctly.
Important: Chemical solvents are not allowed!
13